(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole (Part Numbers)

MISUMI

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw holes on both ends and spanner grooves. L size standard expanded! You can now purchase from an even more complete lineup.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Both Ends Threaded with Wrench Flats/Cross-Drilled Hole:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SFAU	SFUU	-	SFHM	-	SUJ2 Equivalent	For Effective Hardened Depth of Induction Hardening P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFAU	SSFUU	-	SSFHM	-	SUS440C or 13Cr stainless		-
PSFAU	PSFUU	-	PSFHM	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAU	PSSFUU	-	PSSFHM	-	SUS440C or 13Cr stainless
RSFAU	-	-	RSFHM	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGU	-	PSGHM	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGU	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	T	-	S	-	Q	-	SC	-	H
SFHM15	-	300	-	F28	-	B16	-	P6	-	T17	-	S12	-	Q12			-	H8

Part Number			1mm Increments			P,Q Selection											Wrench Flats Dimensions			D Tol.			(Y)Max.	R	C
Type		D	L	F, T	B, S	P,Q Selection											SC	W	ℓ₁	g6	h5	f8	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) SFAU SSFAU PSFAU PSSFAU RSFAU (D≤30,L≤500,Ymax≤800) (D Tol. f8) PSFGU PSSFGU	(D Tol. h5) SFUU SSFUU PSFUU PSSFUU	6	25~ 796	2≤F≤Px5 2≤T≤Qx5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) B=0 S=0 [ ! ]B, S≥Pitchx3	3	4	5									SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	5	8	-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~ 996			3	4	5	6									7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~ 996				4	5	6	8								8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1196					5	6	8	10							10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1196					5	6	8	10	12						11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1196					5	6	8	10	12						13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1196					5	6	8	10	12						14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1196					5	6	8	10	12	16					16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1196						6	8	10	12	16					17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1196							8	10	12	16	20	24			22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1496							8	10	12	16	20	24			27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1496								10	12	16	20	24	30		30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1496									12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1496										16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number		1mm Increments			P,Q Selection										Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	R	C
Type	D	L	F, T	B, S	P,Q Selection										H	d	g6	f8	(Y)Max.	R	C
(With Cross-Drilled Hole) (D Tol. g6) SFHM SSFHM PSFHM PSSFHM RSFHM (D Tol. f8) PSGHM [ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	8	25~500	2≤F≤Px5 2≤T≤Qx5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) B=0 S=0 [ ! ]B, S≥Pitchx3	3	4	5	6							H=1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8							3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10						3	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16				6	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16				6	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increments			P,Q Selection										Wrench Flats Dimensions			D Tol.	(Y)Max.	R	C
Type	D	L	F, T	B, S	P,Q Selection										SC	W	ℓ₁	g6	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSFAU (Ymax≤800)	6	25~500	2≤F≤Px5 2≤T≤Qx5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) B=0 S=0 [ ! ]B, S≥Pitchx3	3	4	5								SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	5	8	-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6								7	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8							8	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10						10	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12					11	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12					13	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12					14	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16				16	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16				17	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24		22	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24		27	15	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

[ ! ]Thread machining will not be applied to B=0 or S=0.

Coarse Thread Dimension
M	Pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-P[6,8,10,12,16,20]-T[2-140/1]-S[0-140/1]-Q[6,8,10,12,16,20]-SC[0-1190/1]
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-P[6,8,10,12,16,20]-T[2-140/1]-S[0-140/1]-QMC[6,8,10,12,15,17,20]-SC[0-1190/1]
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-P[6,8,10,12,16,20]-T[2-140/1]-S[0-140/1]-QMS[10,12,14,18]-SC[0-1190/1]
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-PMC[6,8,10,12,15,17,20]-T[2-140/1]-S[0-140/1]-Q[6,8,10,12,16,20]-SC[0-1190/1]
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-PMC[6,8,10,12,15,17,20]-T[2-140/1]-S[0-140/1]-QMC[6,8,10,12,15,17,20]-SC[0-1190/1]
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-PMC[6,8,10,12,15,17,20]-T[2-140/1]-S[0-140/1]-QMS[10,12,14,18]-SC[0-1190/1]
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-PMS[10,12,14,18]-T[2-140/1]-S[0-140/1]-Q[6,8,10,12,16,20]-SC[0-1190/1]
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-PMS[10,12,14,18]-T[2-140/1]-S[0-140/1]-QMC[6,8,10,12,15,17,20]-SC[0-1190/1]
SFAU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-PMS[10,12,14,18]-T[2-140/1]-S[0-140/1]-QMS[10,12,14,18]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-P[8,10,12,16,20,24]-T[2-120/1]-S[0-168/1]-Q[8,10,12,16,20,24]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-P[8,10,12,16,20,24]-T[2-120/1]-S[0-168/1]-QMC[8,10,12,15,17,20,25]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-P[8,10,12,16,20,24]-T[2-120/1]-S[0-168/1]-QMS[10,12,14,18]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-PMC[8,10,12,15,17,20,25]-T[2-120/1]-S[0-168/1]-Q[8,10,12,16,20,24]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-PMC[8,10,12,15,17,20,25]-T[2-120/1]-S[0-168/1]-QMC[8,10,12,15,17,20,25]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-PMC[8,10,12,15,17,20,25]-T[2-120/1]-S[0-168/1]-QMS[10,12,14,18]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-PMS[10,12,14,18]-T[2-120/1]-S[0-168/1]-Q[8,10,12,16,20,24]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-PMS[10,12,14,18]-T[2-120/1]-S[0-168/1]-QMC[8,10,12,15,17,20,25]-SC[0-1190/1]
SFAU25-[25-1196/1]-F[2-120/1]-B[2-168/1]-PMS[10,12,14,18]-T[2-120/1]-S[0-168/1]-QMS[10,12,14,18]-SC[0-1190/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[8,10,12,16,20,24]-T[2-210/1]-S[0-210/1]-Q[8,10,12,16,20,24,30]-SC[0-1485/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[8,10,12,16,20,24]-T[2-210/1]-S[0-210/1]-QMC[8,10,12,15,17,20,25,30]-SC[0-1485/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[8,10,12,16,20,24]-T[2-210/1]-S[0-210/1]-QMS[10,12,14,18]-SC[0-1485/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[8,10,12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-Q[8,10,12,16,20,24,30]-SC[0-1485/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[8,10,12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-QMC[8,10,12,15,17,20,25,30]-SC[0-1485/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[8,10,12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-QMS[10,12,14,18]-SC[0-1485/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[10,12,14,18]-T[2-210/1]-S[0-210/1]-Q[8,10,12,16,20,24,30]-SC[0-1485/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[10,12,14,18]-T[2-210/1]-S[0-210/1]-QMC[8,10,12,15,17,20,25,30]-SC[0-1485/1]
SFAU30-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[10,12,14,18]-T[2-210/1]-S[0-210/1]-QMS[10,12,14,18]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[10,12,16,20,24,30]-T[2-210/1]-S[0-210/1]-Q[10,12,16,20,24,30]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[10,12,16,20,24,30]-T[2-210/1]-S[0-210/1]-QMC[10,12,15,17,20,25,30]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[10,12,16,20,24,30]-T[2-210/1]-S[0-210/1]-QMS[10,12,14,18]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[10,12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-Q[10,12,16,20,24,30]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[10,12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-QMC[10,12,15,17,20,25,30]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[10,12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-QMS[10,12,14,18]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[10,12,14,18]-T[2-210/1]-S[0-210/1]-Q[10,12,16,20,24,30]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[10,12,14,18]-T[2-210/1]-S[0-210/1]-QMC[10,12,15,17,20,25,30]-SC[0-1485/1]
SFAU35-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[10,12,14,18]-T[2-210/1]-S[0-210/1]-QMS[10,12,14,18]-SC[0-1485/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[12,16,20,24,30]-T[2-210/1]-S[0-210/1]-Q[12,16,20,24,30]-SC[0-1480/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[12,16,20,24,30]-T[2-210/1]-S[0-210/1]-QMC[12,15,17,20,25,30]-SC[0-1480/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[12,16,20,24,30]-T[2-210/1]-S[0-210/1]-QMS[12,14,18]-SC[0-1480/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-Q[12,16,20,24,30]-SC[0-1480/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-QMC[12,15,17,20,25,30]-SC[0-1480/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[12,15,17,20,25,30]-T[2-210/1]-S[0-210/1]-QMS[12,14,18]-SC[0-1480/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[12,14,18]-T[2-210/1]-S[0-210/1]-Q[12,16,20,24,30]-SC[0-1480/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[12,14,18]-T[2-210/1]-S[0-210/1]-QMC[12,15,17,20,25,30]-SC[0-1480/1]
SFAU40-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[12,14,18]-T[2-210/1]-S[0-210/1]-QMS[12,14,18]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[16,20,24,30]-T[2-210/1]-S[0-210/1]-Q[16,20,24,30]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[16,20,24,30]-T[2-210/1]-S[0-210/1]-QMC[15,17,20,25,30]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-P[16,20,24,30]-T[2-210/1]-S[0-210/1]-QMS[14,18]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[15,17,20,25,30]-T[2-210/1]-S[0-210/1]-Q[16,20,24,30]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[15,17,20,25,30]-T[2-210/1]-S[0-210/1]-QMC[15,17,20,25,30]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMC[15,17,20,25,30]-T[2-210/1]-S[0-210/1]-QMS[14,18]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[14,18]-T[2-210/1]-S[0-210/1]-Q[16,20,24,30]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[14,18]-T[2-210/1]-S[0-210/1]-QMC[15,17,20,25,30]-SC[0-1480/1]
SFAU50-[25-1496/1]-F[2-210/1]-B[2-210/1]-PMS[14,18]-T[2-210/1]-S[0-210/1]-QMS[14,18]-SC[0-1480/1]
SFHM8-[25-500/1]-F[2-30/1]-B[2-28/1]-P[3,4,5,6,8]-T[2-30/1]-S[0-28/1]-Q[3,4,5,6,8]-H[0-496/1]
SFHM8-[25-500/1]-F[2-30/1]-B[2-28/1]-P[3,4,5,6,8]-T[2-30/1]-S[0-28/1]-QMC[3,4,5,6,8]-H[0-496/1]
SFHM8-[25-500/1]-F[2-30/1]-B[2-28/1]-PMC[3,4,5,6,8]-T[2-30/1]-S[0-28/1]-Q[3,4,5,6,8]-H[0-496/1]
SFHM8-[25-500/1]-F[2-30/1]-B[2-28/1]-PMC[3,4,5,6,8]-T[2-30/1]-S[0-28/1]-QMC[3,4,5,6,8]-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-P[4,5,6,8,10]-T[2-40/1]-S[0-38/1]-Q[4,5,6,8,10]-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-P[4,5,6,8,10]-T[2-40/1]-S[0-38/1]-QMC[4,5,6,8,10]-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-P[4,5,6,8,10]-T[2-40/1]-S[0-38/1]-QMS10-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMC[4,5,6,8,10]-T[2-40/1]-S[0-38/1]-Q[4,5,6,8,10]-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMC[4,5,6,8,10]-T[2-40/1]-S[0-38/1]-QMC[4,5,6,8,10]-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMC[4,5,6,8,10]-T[2-40/1]-S[0-38/1]-QMS10-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMS10-T[2-40/1]-S[0-38/1]-Q[4,5,6,8,10]-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMS10-T[2-40/1]-S[0-38/1]-QMC[4,5,6,8,10]-H[0-496/1]
SFHM10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMS10-T[2-40/1]-S[0-38/1]-QMS10-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-P[5,6,8,10,12]-T[2-50/1]-S[0-48/1]-Q[5,6,8,10,12]-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-P[5,6,8,10,12]-T[2-50/1]-S[0-48/1]-QMC[5,6,8,10,12]-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-P[5,6,8,10,12]-T[2-50/1]-S[0-48/1]-QMS[10,12]-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMC[5,6,8,10,12]-T[2-50/1]-S[0-48/1]-Q[5,6,8,10,12]-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMC[5,6,8,10,12]-T[2-50/1]-S[0-48/1]-QMC[5,6,8,10,12]-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMC[5,6,8,10,12]-T[2-50/1]-S[0-48/1]-QMS[10,12]-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMS[10,12]-T[2-50/1]-S[0-48/1]-Q[5,6,8,10,12]-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMS[10,12]-T[2-50/1]-S[0-48/1]-QMC[5,6,8,10,12]-H[0-496/1]
SFHM12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMS[10,12]-T[2-50/1]-S[0-48/1]-QMS[10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-58/1]-Q[5,6,8,10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-58/1]-QMC[5,6,8,10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-58/1]-QMS[10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-58/1]-Q[5,6,8,10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-58/1]-QMC[5,6,8,10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-58/1]-QMS[10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12]-T[2-60/1]-S[0-58/1]-Q[5,6,8,10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12]-T[2-60/1]-S[0-58/1]-QMC[5,6,8,10,12]-H[0-496/1]
SFHM13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12]-T[2-60/1]-S[0-58/1]-QMS[10,12]-H[0-496/1]
SFHM15-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12,16]-T[2-60/1]-S[0-58/1]-Q[5,6,8,10,12]-H[0-496/1]
SFHM15-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12,16]-T[2-60/1]-S[0-58/1]-QMC[5,6,8,10,12,15]-H[0-496/1]
SFHM15-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12,16]-T[2-60/1]-S[0-58/1]-QMS[10,12,14]-H[0-496/1]
SFHM15-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12,15]-T[2-60/1]-S[0-58/1]-Q[5,6,8,10,12]-H[0-496/1]
SFHM15-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12,15]-T[2-60/1]-S[0-58/1]-QMC[5,6,8,10,12,15]-H[0-496/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	B (mm)	F (mm)	Fine Thread [QMC] (mm)	Fine Thread [QMS] (mm)	H (mm)	PMC (mm)	PMS (mm)	Q (mm)	S (mm)	T (mm)	Threaded [P] (mm)
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	-	-	-	-	-	6 ～ 20	0 ～ 140	2 ～ 140	6 ～ 20
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	6 ～ 20	-	-	-	-	-	0 ～ 140	2 ～ 140	6 ～ 20
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	-	10 ～ 18	-	-	-	-	0 ～ 140	2 ～ 140	6 ～ 20
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	-	-	-	6 ～ 20	-	6 ～ 20	0 ～ 140	2 ～ 140	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	6 ～ 20	-	-	6 ～ 20	-	-	0 ～ 140	2 ～ 140	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	-	10 ～ 18	-	6 ～ 20	-	-	0 ～ 140	2 ～ 140	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	-	-	-	-	10 ～ 18	6 ～ 20	0 ～ 140	2 ～ 140	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	6 ～ 20	-	-	-	10 ～ 18	-	0 ～ 140	2 ～ 140	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 140	2 ～ 140	-	10 ～ 18	-	-	10 ～ 18	-	0 ～ 140	2 ～ 140	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	-	-	-	-	-	8 ～ 24	0 ～ 168	2 ～ 120	8 ～ 24
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	8 ～ 25	-	-	-	-	-	0 ～ 168	2 ～ 120	8 ～ 24
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	-	10 ～ 18	-	-	-	-	0 ～ 168	2 ～ 120	8 ～ 24
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	-	-	-	8 ～ 25	-	8 ～ 24	0 ～ 168	2 ～ 120	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	8 ～ 25	-	-	8 ～ 25	-	-	0 ～ 168	2 ～ 120	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	-	10 ～ 18	-	8 ～ 25	-	-	0 ～ 168	2 ～ 120	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	-	-	-	-	10 ～ 18	8 ～ 24	0 ～ 168	2 ～ 120	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	8 ～ 25	-	-	-	10 ～ 18	-	0 ～ 168	2 ～ 120	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 168	2 ～ 120	-	10 ～ 18	-	-	10 ～ 18	-	0 ～ 168	2 ～ 120	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	-	-	-	-	8 ～ 30	0 ～ 210	2 ～ 210	8 ～ 24
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	8 ～ 30	-	-	-	-	-	0 ～ 210	2 ～ 210	8 ～ 24
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	10 ～ 18	-	-	-	-	0 ～ 210	2 ～ 210	8 ～ 24
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	-	-	8 ～ 30	-	8 ～ 30	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	8 ～ 30	-	-	8 ～ 30	-	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	10 ～ 18	-	8 ～ 30	-	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	-	-	-	10 ～ 18	8 ～ 30	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	8 ～ 30	-	-	-	10 ～ 18	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	10 ～ 18	-	-	10 ～ 18	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	-	-	-	-	10 ～ 30	0 ～ 210	2 ～ 210	10 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	10 ～ 30	-	-	-	-	-	0 ～ 210	2 ～ 210	10 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	10 ～ 18	-	-	-	-	0 ～ 210	2 ～ 210	10 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	-	-	10 ～ 30	-	10 ～ 30	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	10 ～ 30	-	-	10 ～ 30	-	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	10 ～ 18	-	10 ～ 30	-	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	-	-	-	10 ～ 18	10 ～ 30	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	10 ～ 30	-	-	-	10 ～ 18	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 210	2 ～ 210	-	10 ～ 18	-	-	10 ～ 18	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	-	-	-	-	12 ～ 30	0 ～ 210	2 ～ 210	12 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	12 ～ 30	-	-	-	-	-	0 ～ 210	2 ～ 210	12 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	12 ～ 18	-	-	-	-	0 ～ 210	2 ～ 210	12 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	-	-	12 ～ 30	-	12 ～ 30	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	12 ～ 30	-	-	12 ～ 30	-	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	12 ～ 18	-	12 ～ 30	-	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	-	-	-	12 ～ 18	12 ～ 30	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	12 ～ 30	-	-	-	12 ～ 18	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	12 ～ 18	-	-	12 ～ 18	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	-	-	-	-	16 ～ 30	0 ～ 210	2 ～ 210	16 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	15 ～ 30	-	-	-	-	-	0 ～ 210	2 ～ 210	16 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	14 ～ 18	-	-	-	-	0 ～ 210	2 ～ 210	16 ～ 30
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	-	-	15 ～ 30	-	16 ～ 30	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	15 ～ 30	-	-	15 ～ 30	-	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	14 ～ 18	-	15 ～ 30	-	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	-	-	-	14 ～ 18	16 ～ 30	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	15 ～ 30	-	-	-	14 ～ 18	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	10 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	0 ～ 1480	0 ～ 210	2 ～ 210	-	14 ～ 18	-	-	14 ～ 18	-	0 ～ 210	2 ～ 210	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 28	2 ～ 30	-	-	0 ～ 496	-	-	3 ～ 8	0 ～ 28	2 ～ 30	3 ～ 8
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 28	2 ～ 30	3 ～ 8	-	0 ～ 496	-	-	-	0 ～ 28	2 ～ 30	3 ～ 8
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 28	2 ～ 30	-	-	0 ～ 496	3 ～ 8	-	3 ～ 8	0 ～ 28	2 ～ 30	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 28	2 ～ 30	3 ～ 8	-	0 ～ 496	3 ～ 8	-	-	0 ～ 28	2 ～ 30	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	-	-	0 ～ 496	-	-	4 ～ 10	0 ～ 38	2 ～ 40	4 ～ 10
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	4 ～ 10	-	0 ～ 496	-	-	-	0 ～ 38	2 ～ 40	4 ～ 10
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	-	10	0 ～ 496	-	-	-	0 ～ 38	2 ～ 40	4 ～ 10
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	-	-	0 ～ 496	4 ～ 10	-	4 ～ 10	0 ～ 38	2 ～ 40	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	4 ～ 10	-	0 ～ 496	4 ～ 10	-	-	0 ～ 38	2 ～ 40	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	-	10	0 ～ 496	4 ～ 10	-	-	0 ～ 38	2 ～ 40	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	-	-	0 ～ 496	-	10	4 ～ 10	0 ～ 38	2 ～ 40	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	4 ～ 10	-	0 ～ 496	-	10	-	0 ～ 38	2 ～ 40	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	-	10	0 ～ 496	-	10	-	0 ～ 38	2 ～ 40	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	-	-	0 ～ 496	-	-	5 ～ 12	0 ～ 48	2 ～ 50	5 ～ 12
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	5 ～ 12	-	0 ～ 496	-	-	-	0 ～ 48	2 ～ 50	5 ～ 12
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	-	10 ～ 12	0 ～ 496	-	-	-	0 ～ 48	2 ～ 50	5 ～ 12
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	-	-	0 ～ 496	5 ～ 12	-	5 ～ 12	0 ～ 48	2 ～ 50	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	5 ～ 12	-	0 ～ 496	5 ～ 12	-	-	0 ～ 48	2 ～ 50	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	-	10 ～ 12	0 ～ 496	5 ～ 12	-	-	0 ～ 48	2 ～ 50	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	-	-	0 ～ 496	-	10 ～ 12	5 ～ 12	0 ～ 48	2 ～ 50	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	5 ～ 12	-	0 ～ 496	-	10 ～ 12	-	0 ～ 48	2 ～ 50	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	-	10 ～ 12	0 ～ 496	-	10 ～ 12	-	0 ～ 48	2 ～ 50	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	-	-	5 ～ 12	0 ～ 58	2 ～ 60	5 ～ 12
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 12	-	0 ～ 496	-	-	-	0 ～ 58	2 ～ 60	5 ～ 12
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 12	0 ～ 496	-	-	-	0 ～ 58	2 ～ 60	5 ～ 12
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	5 ～ 12	-	5 ～ 12	0 ～ 58	2 ～ 60	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 12	-	0 ～ 496	5 ～ 12	-	-	0 ～ 58	2 ～ 60	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 12	0 ～ 496	5 ～ 12	-	-	0 ～ 58	2 ～ 60	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	-	10 ～ 12	5 ～ 12	0 ～ 58	2 ～ 60	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 12	-	0 ～ 496	-	10 ～ 12	-	0 ～ 58	2 ～ 60	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 12	0 ～ 496	-	10 ～ 12	-	0 ～ 58	2 ～ 60	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	-	-	5 ～ 12	0 ～ 58	2 ～ 60	5 ～ 16
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 15	-	0 ～ 496	-	-	-	0 ～ 58	2 ～ 60	5 ～ 16
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 14	0 ～ 496	-	-	-	0 ～ 58	2 ～ 60	5 ～ 16
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	5 ～ 15	-	5 ～ 12	0 ～ 58	2 ～ 60	-
-	1 Piece(s)	11 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 15	-	0 ～ 496	5 ～ 15	-	-	0 ～ 58	2 ～ 60	-

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Threaded
Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

967 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1496/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1485/1mm Unit(s)]
Clear
B(mm)
[2-210/1mm Unit(s)]
Clear
F(mm)
[2-210/1mm Unit(s)]
Clear
Fine Thread [QMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [QMS](mm)
10

12

14

18
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
PMC(mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
PMS(mm)
10

12

14

18
Clear
Q(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
S(mm)
[0-210/1mm Unit(s)]
Clear
T(mm)
[2-210/1mm Unit(s)]
Clear
Threaded [P](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSFAU
- PSFGU
- PSFHM
- PSFUU
- PSGHM
- PSSFAU
- PSSFGU
- PSSFHM
- PSSFUU
- RSFAU
- RSFHM
- SFAU
- SFHM
- SFUU
- SSFAU
- SSFHM
- SSFUU
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less

11 Day(s) or Less

15 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole (Part Numbers)

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

B(mm)

F(mm)

Fine Thread [QMC](mm)

Fine Thread [QMS](mm)

H(mm)

PMC(mm)

PMS(mm)

Q(mm)

S(mm)

T(mm)

Threaded [P](mm)

type

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB