(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole

Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw holes on both ends and spanner grooves. L size standard expanded! You can now purchase from an even more complete lineup.

Both Ends Threaded with Wrench Flats/Cross-Drilled Hole:Related Image

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
With Wrench FlatsWith Cross-Drilled Hole
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. f8
SFAUSFUU-SFHM-SUJ2 EquivalentFor Effective Hardened Depth of
Induction Hardening P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless: 56HRC~
-
SSFAUSSFUU-SSFHM-SUS440C or 13Cr stainless
PSFAUPSFUU-PSFHM-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAUPSSFUU-PSSFHM-SUS440C or 13Cr stainless
RSFAU--RSFHM-SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSFGU-PSGHMS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSFGU--SUS304

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number-L-F-B-P-T-S-Q-SC-H
SFHM15
-
300
-
F28
-
B16
-
P6
-
T17
-
S12
-
Q12


-
H8

Part Number1mm IncrementsP,Q SelectionWrench Flats DimensionsD Tol.(Y)Max.RC
TypeDLF, TB, SSCW1g6h5f8
(With Wrench Flats)

(D Tol. g6)
SFAU
SSFAU
PSFAU
PSSFAU
RSFAU

(D≤30,L≤500,Ymax≤800)

(D Tol. f8)
PSFGU
PSSFGU
(D Tol. h5) SFUU
SSFUU
PSFUU
PSSFUU
625~ 7962≤F≤Px5
2≤T≤Qx5
(When P≤6)
B≤F-2
(When P=8, 10)
B≤F-3
(When P≥12)
B≤F-5
(When Q≤6)
S≤T-2
(When Q=8, 10)
S≤T-3
(When Q≥12)
S≤T-5
(W/o Threads)
B=0
S=0

[ ! ]B, S≥Pitchx3
345        SC = 1mm Increment

[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]Details of Wrench Flats
>> P.142
58-0.004
-0.012
0
-0.005
-0.010
-0.028
6000.3 or Less0.5 or Less
825~ 9963456       78-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1025~ 996 4568      88-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1225~1196  56810     1010-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1325~1196  5681012    1110-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1525~1196  5681012    1310-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1625~1196  5681012    1410-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
1825~1196  568101216   1610-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
2025~1196   68101216   1710-0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
2525~1196    81012162024 2210-0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
3025~1496    81012162024 2715-0.007
-0.020
0
-0.009
-0.020
-0.053
15000.3 or Less1.0 or Less
3525~1496     1012162024303015-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
4025~1496      12162024303620-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
5025~1496       162024304120-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less

Part Number1mm IncrementsP,Q SelectionCross-Drilled Hole DimensionsD Tol.(Y)Max.RC
TypeDLF, TB, SHdg6f8
(With Cross-Drilled Hole)
(D Tol. g6)
SFHM
SSFHM
PSFHM
PSSFHM
R
SFHM

(D Tol. f8)
PSGHM

[ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.
825~5002≤F≤Px5
2≤T≤Qx5
(When P≤6)
B≤F-2
(When P=8, 10)
B≤F-3
(When P≥12)
B≤F-5
(When Q≤6)
S≤T-2
(When Q=8, 10)
S≤T-3
(When Q≥12)
S≤T-5
(W/o Threads)
B=0
S=0

[ ! ]B, S≥Pitchx3
3456      H=1mm Increment
[ ! ]L≥H+d/2+2
[ ! ]H≥d/2+2
3-0.005
-0.014
-0.013
-0.035
8000.3 or Less0.5 or Less
1025~500 4568     3-0.005
-0.014
-0.013
-0.035
8000.3 or Less0.5 or Less
1225~500  56810    3-0.006
-0.017
-0.016
-0.043
10000.3 or Less0.5 or Less
1325~500  5681012   4-0.006
-0.017
-0.016
-0.043
10000.3 or Less0.5 or Less
1525~500  5681012   4-0.006
-0.017
-0.016
-0.043
10000.3 or Less0.5 or Less
1625~500  5681012   4-0.006
-0.017
-0.016
-0.043
12000.3 or Less0.5 or Less
1825~500  568101216  6-0.006
-0.017
-0.016
-0.043
12000.3 or Less0.5 or Less
2025~500   68101216  6-0.007
-0.020
-0.020
-0.053
12000.3 or Less1.0 or Less
2525~500    810121620247-0.007
-0.020
-0.020
-0.053
12000.3 or Less1.0 or Less
3025~500    810121620247-0.007
-0.020
-0.020
-0.053
15000.3 or Less1.0 or Less

Part Number1mm IncrementsP,Q SelectionWrench Flats DimensionsD Tol.(Y)Max.RC
TypeDLF, TB, SSCW1g6
(With Wrench Flats)

(D Tol. g6)
Low Temp. Black Chrome Plating
RSFAU
(Ymax≤800)
625~5002≤F≤Px5
2≤T≤Qx5
(When P≤6)
B≤F-2
(When P=8, 10)
B≤F-3
(When P≥12)
B≤F-5
(When Q≤6)
S≤T-2
(When Q=8, 10)
S≤T-3
(When Q≥12)
S≤T-5
(W/o Threads)
B=0
S=0

[ ! ]B, S≥Pitchx3
345       SC = 1mm Increment

[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]Details of Wrench Flats
>> P.142
58-0.004
-0.012
6000.3 or Less0.5 or Less
825~5003456      78-0.005
-0.014
8000.3 or Less0.5 or Less
1025~500 4568     88-0.005
-0.014
8000.3 or Less0.5 or Less
1225~500  56810    1010-0.006
-0.017
10000.3 or Less0.5 or Less
1325~500  5681012   1110-0.006
-0.017
10000.3 or Less0.5 or Less
1525~500  5681012   1310-0.006
-0.017
10000.3 or Less0.5 or Less
1625~500  5681012   1410-0.006
-0.017
12000.3 or Less0.5 or Less
1825~500  568101216  1610-0.006
-0.017
12000.3 or Less0.5 or Less
2025~500   68101216  1710-0.007
-0.020
12000.3 or Less1.0 or Less
2525~500    810121620242210-0.007
-0.020
12000.3 or Less1.0 or Less
3025~500    810121620242715-0.007
-0.020
15000.3 or Less1.0 or Less
[ ! ]Thread machining will not be applied to B=0 or S=0.

Coarse Thread Dimension
MPitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

Alterations

Both Ends Threaded with Wrench Flats/Cross-Drilled Hole:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSFGU6-[25-596/1]-F[2-42/1]-B[2-42/1]-P[3,​4,​5]-T[2-42/1]-S[0-42/1]-Q[3,​4,​5]-SC[0-592/1]
PSFGU6-[25-596/1]-F[2-42/1]-B[2-42/1]-P[3,​4,​5]-T[2-42/1]-S[0-42/1]-QMC[3,​4,​5]-SC[0-592/1]
PSFGU6-[25-596/1]-F[2-42/1]-B[2-42/1]-PMC[3,​4,​5]-T[2-42/1]-S[0-42/1]-Q[3,​4,​5]-SC[0-592/1]
PSFGU6-[25-596/1]-F[2-42/1]-B[2-42/1]-PMC[3,​4,​5]-T[2-42/1]-S[0-42/1]-QMC[3,​4,​5]-SC[0-592/1]
PSFGU8-[25-796/1]-F[2-56/1]-B[2-56/1]-P[3,​4,​5,​6]-T[2-56/1]-S[0-56/1]-Q[3,​4,​5,​6]-SC[0-592/1]
PSFGU8-[25-796/1]-F[2-56/1]-B[2-56/1]-P[3,​4,​5,​6]-T[2-56/1]-S[0-56/1]-QMC[3,​4,​5,​6]-SC[0-592/1]
PSFGU8-[25-796/1]-F[2-56/1]-B[2-56/1]-PMC[3,​4,​5,​6]-T[2-56/1]-S[0-56/1]-Q[3,​4,​5,​6]-SC[0-592/1]
PSFGU8-[25-796/1]-F[2-56/1]-B[2-56/1]-PMC[3,​4,​5,​6]-T[2-56/1]-S[0-56/1]-QMC[3,​4,​5,​6]-SC[0-592/1]
PSFGU10-[25-796/1]-F[2-70/1]-B[2-70/1]-P[4,​5,​6,​8]-T[2-70/1]-S[0-70/1]-Q[4,​5,​6,​8]-SC[0-792/1]
PSFGU10-[25-796/1]-F[2-70/1]-B[2-70/1]-P[4,​5,​6,​8]-T[2-70/1]-S[0-70/1]-QMC[4,​5,​6,​8]-SC[0-792/1]
PSFGU10-[25-796/1]-F[2-70/1]-B[2-70/1]-PMC[4,​5,​6,​8]-T[2-70/1]-S[0-70/1]-Q[4,​5,​6,​8]-SC[0-792/1]
PSFGU10-[25-796/1]-F[2-70/1]-B[2-70/1]-PMC[4,​5,​6,​8]-T[2-70/1]-S[0-70/1]-QMC[4,​5,​6,​8]-SC[0-792/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10]-SC[0-990/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10]-SC[0-990/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-QMS10-SC[0-990/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10]-SC[0-990/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10]-SC[0-990/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-QMS10-SC[0-990/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-PMS10-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10]-SC[0-990/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-PMS10-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10]-SC[0-990/1]
PSFGU12-[25-996/1]-F[2-84/1]-B[2-84/1]-PMS10-T[2-84/1]-S[0-84/1]-QMS10-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10,​12]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10,​12]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10,​12]-T[2-84/1]-S[0-84/1]-QMS[10,​12]-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10,​12]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10,​12]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10,​12]-T[2-84/1]-S[0-84/1]-QMS[10,​12]-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU13-[25-996/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12]-T[2-84/1]-S[0-84/1]-QMS[10,​12]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10,​12,​15]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-84/1]-S[0-84/1]-QMS[10,​12,​14]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10,​12,​15]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15]-T[2-84/1]-S[0-84/1]-QMS[10,​12,​14]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10,​12]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10,​12,​15]-SC[0-990/1]
PSFGU15-[25-996/1]-F[2-84/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-84/1]-S[0-84/1]-QMS[10,​12,​14]-SC[0-990/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-112/1]-S[0-112/1]-Q[5,​6,​8,​10,​12,​16]-SC[0-1190/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-112/1]-S[0-112/1]-QMC[5,​6,​8,​10,​12,​15]-SC[0-1190/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-112/1]-S[0-112/1]-QMS[10,​12,​14]-SC[0-1190/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15]-T[2-112/1]-S[0-112/1]-Q[5,​6,​8,​10,​12,​16]-SC[0-1190/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15]-T[2-112/1]-S[0-112/1]-QMC[5,​6,​8,​10,​12,​15]-SC[0-1190/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15]-T[2-112/1]-S[0-112/1]-QMS[10,​12,​14]-SC[0-1190/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-112/1]-S[0-112/1]-Q[5,​6,​8,​10,​12,​16]-SC[0-1190/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-112/1]-S[0-112/1]-QMC[5,​6,​8,​10,​12,​15]-SC[0-1190/1]
PSFGU16-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-112/1]-S[0-112/1]-QMS[10,​12,​14]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-112/1]-S[0-112/1]-Q[5,​6,​8,​10,​12,​16]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-112/1]-S[0-112/1]-QMC[5,​6,​8,​10,​12,​15,​17]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-P[5,​6,​8,​10,​12,​16]-T[2-112/1]-S[0-112/1]-QMS[10,​12,​14,​18]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15,​17]-T[2-112/1]-S[0-112/1]-Q[5,​6,​8,​10,​12,​16]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15,​17]-T[2-112/1]-S[0-112/1]-QMC[5,​6,​8,​10,​12,​15,​17]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMC[5,​6,​8,​10,​12,​15,​17]-T[2-112/1]-S[0-112/1]-QMS[10,​12,​14,​18]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-112/1]-S[0-112/1]-Q[5,​6,​8,​10,​12,​16]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-112/1]-S[0-112/1]-QMC[5,​6,​8,​10,​12,​15,​17]-SC[0-1190/1]
PSFGU18-[25-1196/1]-F[2-112/1]-B[2-112/1]-PMS[10,​12,​14]-T[2-112/1]-S[0-112/1]-QMS[10,​12,​14,​18]-SC[0-1190/1]
PSFGU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-P[6,​8,​10,​12,​16,​20]-T[2-140/1]-S[0-140/1]-Q[6,​8,​10,​12,​16,​20]-SC[0-1190/1]
PSFGU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-P[6,​8,​10,​12,​16,​20]-T[2-140/1]-S[0-140/1]-QMC[6,​8,​10,​12,​15,​17,​20]-SC[0-1190/1]
PSFGU20-[25-1196/1]-F[2-140/1]-B[2-140/1]-P[6,​8,​10,​12,​16,​20]-T[2-140/1]-S[0-140/1]-QMS[10,​12,​14,​18]-SC[0-1190/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC]
(mm)
B
(mm)
F
(mm)
Fine Thread [QMC]
(mm)
Fine Thread [QMS]
(mm)
H
(mm)
PMC
(mm)
PMS
(mm)
Q
(mm)
S
(mm)
T
(mm)
Threaded [P]
(mm)

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating625 ~ 596f8No Induction Hardening0 ~ 5920 ~ 422 ~ 42-----3 ~ 50 ~ 422 ~ 423 ~ 5

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating625 ~ 596f8No Induction Hardening0 ~ 5920 ~ 422 ~ 423 ~ 5-----0 ~ 422 ~ 423 ~ 5

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating625 ~ 596f8No Induction Hardening0 ~ 5920 ~ 422 ~ 42---3 ~ 5-3 ~ 50 ~ 422 ~ 42-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating625 ~ 596f8No Induction Hardening0 ~ 5920 ~ 422 ~ 423 ~ 5--3 ~ 5--0 ~ 422 ~ 42-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating825 ~ 796f8No Induction Hardening0 ~ 5920 ~ 562 ~ 56-----3 ~ 60 ~ 562 ~ 563 ~ 6

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating825 ~ 796f8No Induction Hardening0 ~ 5920 ~ 562 ~ 563 ~ 6-----0 ~ 562 ~ 563 ~ 6

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating825 ~ 796f8No Induction Hardening0 ~ 5920 ~ 562 ~ 56---3 ~ 6-3 ~ 60 ~ 562 ~ 56-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating825 ~ 796f8No Induction Hardening0 ~ 5920 ~ 562 ~ 563 ~ 6--3 ~ 6--0 ~ 562 ~ 56-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 796f8No Induction Hardening0 ~ 7920 ~ 702 ~ 70-----4 ~ 80 ~ 702 ~ 704 ~ 8

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 796f8No Induction Hardening0 ~ 7920 ~ 702 ~ 704 ~ 8-----0 ~ 702 ~ 704 ~ 8

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 796f8No Induction Hardening0 ~ 7920 ~ 702 ~ 70---4 ~ 8-4 ~ 80 ~ 702 ~ 70-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 796f8No Induction Hardening0 ~ 7920 ~ 702 ~ 704 ~ 8--4 ~ 8--0 ~ 702 ~ 70-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84-----5 ~ 100 ~ 842 ~ 845 ~ 10

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 845 ~ 10-----0 ~ 842 ~ 845 ~ 10

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84-10----0 ~ 842 ~ 845 ~ 10

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84---5 ~ 10-5 ~ 100 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 845 ~ 10--5 ~ 10--0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84-10-5 ~ 10--0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84----105 ~ 100 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 845 ~ 10---10-0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84-10--10-0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84-----5 ~ 120 ~ 842 ~ 845 ~ 12

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 845 ~ 12-----0 ~ 842 ~ 845 ~ 12

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84-10 ~ 12----0 ~ 842 ~ 845 ~ 12

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84---5 ~ 12-5 ~ 120 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 845 ~ 12--5 ~ 12--0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84-10 ~ 12-5 ~ 12--0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84----10 ~ 125 ~ 120 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 845 ~ 12---10 ~ 12-0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening0 ~ 9900 ~ 842 ~ 84-10 ~ 12--10 ~ 12-0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 84-----5 ~ 120 ~ 842 ~ 845 ~ 16

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 845 ~ 15-----0 ~ 842 ~ 845 ~ 16

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 84-10 ~ 14----0 ~ 842 ~ 845 ~ 16

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 84---5 ~ 15-5 ~ 120 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 845 ~ 15--5 ~ 15--0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 84-10 ~ 14-5 ~ 15--0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 84----10 ~ 145 ~ 120 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 845 ~ 15---10 ~ 14-0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening0 ~ 9900 ~ 1122 ~ 84-10 ~ 14--10 ~ 14-0 ~ 842 ~ 84-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112-----5 ~ 160 ~ 1122 ~ 1125 ~ 16

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 1125 ~ 15-----0 ~ 1122 ~ 1125 ~ 16

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112-10 ~ 14----0 ~ 1122 ~ 1125 ~ 16

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112---5 ~ 15-5 ~ 160 ~ 1122 ~ 112-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 1125 ~ 15--5 ~ 15--0 ~ 1122 ~ 112-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112-10 ~ 14-5 ~ 15--0 ~ 1122 ~ 112-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112----10 ~ 145 ~ 160 ~ 1122 ~ 112-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 1125 ~ 15---10 ~ 14-0 ~ 1122 ~ 112-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112-10 ~ 14--10 ~ 14-0 ~ 1122 ~ 112-

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112-----5 ~ 160 ~ 1122 ~ 1125 ~ 16

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 1125 ~ 17-----0 ~ 1122 ~ 1125 ~ 16

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112-10 ~ 18----0 ~ 1122 ~ 1125 ~ 16

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112---5 ~ 17-5 ~ 160 ~ 1122 ~ 112-

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 1125 ~ 17--5 ~ 17--0 ~ 1122 ~ 112-

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112-10 ~ 18-5 ~ 17--0 ~ 1122 ~ 112-

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112----10 ~ 145 ~ 160 ~ 1122 ~ 112-

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 1125 ~ 17---10 ~ 14-0 ~ 1122 ~ 112-

-

1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1122 ~ 112-10 ~ 18--10 ~ 14-0 ~ 1122 ~ 112-

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2025 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1402 ~ 140-----6 ~ 200 ~ 1402 ~ 1406 ~ 20

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2025 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1402 ~ 1406 ~ 20-----0 ~ 1402 ~ 1406 ~ 20

-

1 Piece(s) 11 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2025 ~ 1196f8No Induction Hardening0 ~ 11900 ~ 1402 ~ 140-10 ~ 18----0 ~ 1402 ~ 1406 ~ 20

Loading...

Example

Both Ends Threaded with Wrench Flats/Cross-Drilled Hole:Related Image
 

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) Threaded
Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)