(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Linear Shafts-One End Stepped and Female Thread- (Part Numbers)

Linear Shafts-One End Stepped and Female Thread-

Click this image to zoom it.

Move the mouse over the image to zoom

  • Linear Shafts-One End Stepped and Female Thread-
  • Linear Shafts-One End Stepped and Female Thread-

[Features] One end stepped female thread/one end stepped type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

(i)Caution

  • Please check the content on our website as the PDF does not contain the most up-to-date information.
Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-:Related Image
Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
One End Stepped and TappedOne End Stepped
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. h5D Tol. f8
SFAGSFUG-SFACSFCU-SUJ2 EquivalentEffective Hardened Depth of Induction Hardening >> P.142
SUJ2 Equivalent 56HRC~
SUS440C or 13Cr stainless 56HRC~
-
SSFAGSSFUG-SSFACSSFCU-SUS440C or 13Cr stainless
PSFAGPSFUG-PSFACPSFCU-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAGPSSFUG-PSSFACPSSFCU-SUS440C or 13Cr stainless
RSFAG--RSFAC--SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSFGG--PSCGCS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSFGG--PSSCGCSUS304
D Tol.
Dg6h5f8
8-0.005
-0.014
 0
-0.006
-0.013
-0.035
10
12-0.006
-0.017
 0
-0.008
-0.016
-0.043
13
15
16
18
20-0.007
-0.020
 0
-0.009
-0.020
-0.053
25
30
35-0.009
-0.025
 0
-0.011
-0.025
-0.064
40
50

Specifications

Part Number-L-F-P-M
SFAG20-400-F25-P16-M10
SFUG20-400-F25-P16-M10
SFAC20-500-F25-P16  
         
Part Number1mm IncrementsM (Coarse)
Selection
(Y)Max.RC
TypeDLFP
One End Stepped and Tapped
(D Tol. g6)
SFAG
SSFAG
PSFAG
PSS
FAG
RSFAG

(D≤30, L≤500)
(D Tol. f8)
PSFGG
PSSFGG

(D Tol. h5)
SFUG
SSFUG
PSFUG
PSSFUG



 
One End Stepped
(D Tol. g6)
SFAC
SSFAC
PSFAC
PSS
FAC
RSFAC
(D≤30, L≤500)
(D Tol. f8)
PSCGC
PSSCGC

(D Tol. h5)
SFCU
SSFCU
PSFCU
PSSFCU



 
825~ 9982≤F≤Px46   3          8000.3 or Less0.5 or Less
1025~ 9986 ~ 8345        800
1225~11986~103456       1000
1325~11986~1134568      1000
1525~11986~133456810     1000
1625~11986~143456810     1200
1825~11988~16 45681012    1200
2025~11988~17 45681012    12001.0 or Less
2525~11988~22 4568101216   1200
3025~14989~27  5681012162024 1500
3525~14989~32  5681012162024 15000.5 or Less
4025~149811~37   681012162024301500
5025~149811~47   681012162024301500
• One End Stepped and Tapped [ ! ]P dimensions require M+3≤P. [ ! ]When Mx2.5+4≥Y, tap pilot holes may go through.

Alterations

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSSFGG35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]
PSSFGG40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]
PSSFGG50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]
PSSFUG8-[25-1098/1]-F[2-24/1]-P6-M3
PSSFUG10-[25-1198/1]-F[2-32/1]-P[6,​7,​8]-M[3,​4,​5]
PSSFUG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]
PSSFUG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6
PSSFUG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-M[3,​4,​5,​6,​8]
PSSFUG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-MD[6,​8]
PSSFUG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]
PSSFUG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,​8,​10]
PSSFUG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]
PSSFUG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-MD[6,​8,​10]
PSSFUG18-[25-1398/1]-F[2-64/1]-P[7-16/1]-M[4,​5,​6,​8,​10,​12]
PSSFUG18-[25-1398/1]-F[2-64/1]-P[7-16/1]-MD[6,​8,​10,​12]
PSSFUG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M[4,​5,​6,​8,​10,​12]
PSSFUG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-MD[6,​8,​10,​12]
PSSFUG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M[4,​5,​6,​8,​10,​12,​16]
PSSFUG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-MD[6,​8,​10,​12,​16]
PSSFUG30-[25-1498/1]-F[2-108/1]-P[8-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]
PSSFUG30-[25-1498/1]-F[2-108/1]-P[8-27/1]-MD[6,​8,​10,​12,​16,​20]
PSSFUG35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]
PSSFUG40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]
PSSFUG50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]
RSFAC8-[25-500/1]-F[2-24/1]-P6
RSFAC10-[25-500/1]-F[2-32/1]-P[6,​7,​8]
RSFAC12-[25-500/1]-F[2-40/1]-P[6-10/1]
RSFAC13-[25-500/1]-F[2-52/1]-P[6-11/1]
RSFAC15-[25-500/1]-F[2-52/1]-P[6-13/1]
RSFAC16-[25-500/1]-F[2-56/1]-P[6-14/1]
RSFAC18-[25-500/1]-F[2-64/1]-P[8-16/1]
RSFAC20-[25-500/1]-F[2-68/1]-P[8-17/1]
RSFAC25-[25-500/1]-F[2-88/1]-P[8-22/1]
RSFAC30-[25-500/1]-F[2-108/1]-P[9-27/1]
RSFAG8-[25-500/1]-F[2-24/1]-P6-M3
RSFAG10-[25-500/1]-F[2-32/1]-P[6,​7,​8]-M[3,​4,​5]
RSFAG12-[25-500/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]
RSFAG12-[25-500/1]-F[2-40/1]-P[6-10/1]-MD6
RSFAG13-[25-500/1]-F[2-52/1]-P[6-11/1]-M[3,​4,​5,​6,​8]
RSFAG13-[25-500/1]-F[2-52/1]-P[6-11/1]-MD[6,​8]
RSFAG15-[25-500/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]
RSFAG15-[25-500/1]-F[2-52/1]-P[6-13/1]-MD[6,​8,​10]
RSFAG16-[25-500/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]
RSFAG16-[25-500/1]-F[2-56/1]-P[6-14/1]-MD[6,​8,​10]
RSFAG18-[25-500/1]-F[2-64/1]-P[8-16/1]-M[4,​5,​6,​8,​10,​12]
RSFAG18-[25-500/1]-F[2-64/1]-P[8-16/1]-MD[6,​8,​10,​12]
RSFAG20-[25-500/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]
RSFAG20-[25-500/1]-F[2-68/1]-P[8-17/1]-MD[6,​8,​10,​12]
RSFAG25-[25-500/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]
RSFAG25-[25-500/1]-F[2-88/1]-P[8-22/1]-MD[6,​8,​10,​12,​16]
RSFAG30-[25-500/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]
RSFAG30-[25-500/1]-F[2-108/1]-P[9-27/1]-MD[6,​8,​10,​12,​16,​20]
SFAC8-[25-798/1]-F[2-24/1]-P6
SFAC10-[25-798/1]-F[2-32/1]-P[6,​7,​8]
SFAC12-[25-998/1]-F[2-40/1]-P[6-10/1]
SFAC13-[25-998/1]-F[2-52/1]-P[6-11/1]
SFAC15-[25-998/1]-F[2-52/1]-P[6-13/1]
SFAC16-[25-1198/1]-F[2-56/1]-P[6-14/1]
SFAC18-[25-1198/1]-F[2-64/1]-P[8-16/1]
SFAC20-[25-1198/1]-F[2-68/1]-P[8-17/1]
SFAC25-[25-1198/1]-F[2-88/1]-P[8-22/1]
SFAC30-[25-1498/1]-F[2-108/1]-P[9-27/1]
SFAC35-[25-1498/1]-F[2-128/1]-P[9-32/1]
SFAC40-[25-1498/1]-F[2-148/1]-P[11-37/1]
SFAC50-[25-1498/1]-F[2-188/1]-P[11-47/1]
SFAG8-[25-798/1]-F[2-24/1]-P6-M3
SFAG10-[25-798/1]-F[2-32/1]-P[6,​7,​8]-M[3,​4,​5]
SFAG12-[25-998/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]
SFAG12-[25-998/1]-F[2-40/1]-P[6-10/1]-MD6
SFAG13-[25-998/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]
SFAG13-[25-998/1]-F[2-44/1]-P[6-11/1]-MD[6,​8]
SFAG15-[25-998/1]-F[2-52/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]
SFAG15-[25-998/1]-F[2-52/1]-P[6-14/1]-MD[6,​8,​10]
SFAG16-[25-1198/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]
SFAG16-[25-1198/1]-F[2-56/1]-P[6-14/1]-MD[6,​8,​10]
SFAG18-[25-1198/1]-F[2-64/1]-P[8-16/1]-M[4,​5,​6,​8,​10,​12]
SFAG18-[25-1198/1]-F[2-64/1]-P[8-16/1]-MD[6,​8,​10,​12]
SFAG20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]
SFAG20-[25-1198/1]-F[2-68/1]-P[8-17/1]-MD[6,​8,​10,​12]
SFAG25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]
SFAG25-[25-1198/1]-F[2-88/1]-P[8-22/1]-MD[6,​8,​10,​12,​16]
SFAG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]
SFAG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,​8,​10,​12,​16,​20]
SFAG35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]
SFAG40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]
SFAG50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]
SFCU8-[25-1098/1]-F[2-24/1]-P[3-6/1]
SFCU10-[25-1198/1]-F[2-32/1]-P[3-8/1]
SFCU12-[25-1398/1]-F[2-40/1]-P[3-10/1]
SFCU13-[25-1398/1]-F[2-52/1]-P[4-11/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSEnd Shape (Left) Material Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness F
(mm)
P
(mm)
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M]
(mm)
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD]
(mm)

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS304Not ProvidedHard Chrome Plating3525 ~ 1498f8No Induction Hardening2 ~ 1289 ~ 325 ~ 24-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS304Not ProvidedHard Chrome Plating4025 ~ 1498f8No Induction Hardening2 ~ 14811 ~ 376 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS304Not ProvidedHard Chrome Plating5025 ~ 1498f8No Induction Hardening2 ~ 18811 ~ 476 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating825 ~ 1098h5Induction Hardened (56HRC~)2 ~ 2463-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1025 ~ 1198h5Induction Hardened (56HRC~)2 ~ 326 ~ 83 ~ 5-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1225 ~ 1398h5Induction Hardened (56HRC~)2 ~ 406 ~ 103 ~ 6-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1225 ~ 1398h5Induction Hardened (56HRC~)2 ~ 406 ~ 10-6

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1325 ~ 1398h5Induction Hardened (56HRC~)2 ~ 526 ~ 113 ~ 8-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1325 ~ 1398h5Induction Hardened (56HRC~)2 ~ 526 ~ 11-6 ~ 8

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1525 ~ 1398h5Induction Hardened (56HRC~)2 ~ 526 ~ 133 ~ 10-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1525 ~ 1398h5Induction Hardened (56HRC~)2 ~ 526 ~ 13-6 ~ 10

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1625 ~ 1398h5Induction Hardened (56HRC~)2 ~ 566 ~ 143 ~ 10-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1625 ~ 1398h5Induction Hardened (56HRC~)2 ~ 566 ~ 14-6 ~ 10

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1825 ~ 1398h5Induction Hardened (56HRC~)2 ~ 647 ~ 164 ~ 12-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating1825 ~ 1398h5Induction Hardened (56HRC~)2 ~ 647 ~ 16-6 ~ 12

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating2025 ~ 1398h5Induction Hardened (56HRC~)2 ~ 687 ~ 174 ~ 12-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating2025 ~ 1398h5Induction Hardened (56HRC~)2 ~ 687 ~ 17-6 ~ 12

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating2525 ~ 1398h5Induction Hardened (56HRC~)2 ~ 887 ~ 224 ~ 16-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating2525 ~ 1398h5Induction Hardened (56HRC~)2 ~ 887 ~ 22-6 ~ 16

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating3025 ~ 1498h5Induction Hardened (56HRC~)2 ~ 1088 ~ 275 ~ 24-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating3025 ~ 1498h5Induction Hardened (56HRC~)2 ~ 1088 ~ 27-6 ~ 20

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating3525 ~ 1498h5Induction Hardened (56HRC~)2 ~ 1289 ~ 325 ~ 24-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating4025 ~ 1498h5Induction Hardened (56HRC~)2 ~ 14811 ~ 376 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedHard Chrome Plating5025 ~ 1498h5Induction Hardened (56HRC~)2 ~ 18811 ~ 476 ~ 30-

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)2 ~ 246--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)2 ~ 326 ~ 8--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)2 ~ 406 ~ 10--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)2 ~ 526 ~ 11--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)2 ~ 526 ~ 13--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)2 ~ 566 ~ 14--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)2 ~ 648 ~ 16--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)2 ~ 688 ~ 17--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)2 ~ 888 ~ 22--

-

1 Piece(s) 15 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)2 ~ 1089 ~ 27--

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)2 ~ 2463-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)2 ~ 326 ~ 83 ~ 5-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)2 ~ 406 ~ 103 ~ 6-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)2 ~ 406 ~ 10-6

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)2 ~ 526 ~ 113 ~ 8-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)2 ~ 526 ~ 11-6 ~ 8

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)2 ~ 526 ~ 133 ~ 10-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)2 ~ 526 ~ 13-6 ~ 10

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)2 ~ 566 ~ 143 ~ 10-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)2 ~ 566 ~ 14-6 ~ 10

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)2 ~ 648 ~ 164 ~ 12-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)2 ~ 648 ~ 16-6 ~ 12

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)2 ~ 688 ~ 174 ~ 12-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)2 ~ 688 ~ 17-6 ~ 12

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)2 ~ 888 ~ 224 ~ 16-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)2 ~ 888 ~ 22-6 ~ 16

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)2 ~ 1089 ~ 275 ~ 24-

-

1 Piece(s) 15 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)2 ~ 1089 ~ 27-6 ~ 20

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided825 ~ 798g6Induction Hardened (58HRC~)2 ~ 246--

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1025 ~ 798g6Induction Hardened (58HRC~)2 ~ 326 ~ 8--

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ~ 998g6Induction Hardened (58HRC~)2 ~ 406 ~ 10--

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ~ 998g6Induction Hardened (58HRC~)2 ~ 526 ~ 11--

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ~ 998g6Induction Hardened (58HRC~)2 ~ 526 ~ 13--

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ~ 1198g6Induction Hardened (58HRC~)2 ~ 566 ~ 14--

-

1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ~ 1198g6Induction Hardened (58HRC~)2 ~ 648 ~ 16--

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ~ 1198g6Induction Hardened (58HRC~)2 ~ 688 ~ 17--

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ~ 1198g6Induction Hardened (58HRC~)2 ~ 888 ~ 22--

-

1 Piece(s) 11 Day(s) 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ~ 1498g6Induction Hardened (58HRC~)2 ~ 1089 ~ 27--

-

1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided3525 ~ 1498g6Induction Hardened (58HRC~)2 ~ 1289 ~ 32--

-

1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided4025 ~ 1498g6Induction Hardened (58HRC~)2 ~ 14811 ~ 37--

-

1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided5025 ~ 1498g6Induction Hardened (58HRC~)2 ~ 18811 ~ 47--

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided825 ~ 798g6Induction Hardened (58HRC~)2 ~ 2463-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1025 ~ 798g6Induction Hardened (58HRC~)2 ~ 326 ~ 83 ~ 5-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ~ 998g6Induction Hardened (58HRC~)2 ~ 406 ~ 103 ~ 6-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ~ 998g6Induction Hardened (58HRC~)2 ~ 406 ~ 10-6

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ~ 998g6Induction Hardened (58HRC~)2 ~ 446 ~ 113 ~ 8-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ~ 998g6Induction Hardened (58HRC~)2 ~ 446 ~ 11-6 ~ 8

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ~ 998g6Induction Hardened (58HRC~)2 ~ 526 ~ 143 ~ 10-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ~ 998g6Induction Hardened (58HRC~)2 ~ 526 ~ 14-6 ~ 10

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ~ 1198g6Induction Hardened (58HRC~)2 ~ 566 ~ 143 ~ 10-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ~ 1198g6Induction Hardened (58HRC~)2 ~ 566 ~ 14-6 ~ 10

-

1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ~ 1198g6Induction Hardened (58HRC~)2 ~ 648 ~ 164 ~ 12-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ~ 1198g6Induction Hardened (58HRC~)2 ~ 648 ~ 16-6 ~ 12

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ~ 1198g6Induction Hardened (58HRC~)2 ~ 688 ~ 174 ~ 12-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ~ 1198g6Induction Hardened (58HRC~)2 ~ 688 ~ 17-6 ~ 12

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ~ 1198g6Induction Hardened (58HRC~)2 ~ 888 ~ 224 ~ 16-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ~ 1198g6Induction Hardened (58HRC~)2 ~ 888 ~ 22-6 ~ 16

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ~ 1498g6Induction Hardened (58HRC~)2 ~ 1089 ~ 275 ~ 24-

-

1 Piece(s) 11 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ~ 1498g6Induction Hardened (58HRC~)2 ~ 1089 ~ 27-6 ~ 20

-

1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided3525 ~ 1498g6Induction Hardened (58HRC~)2 ~ 1289 ~ 325 ~ 24-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided4025 ~ 1498g6Induction Hardened (58HRC~)2 ~ 14811 ~ 376 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedNot Provided5025 ~ 1498g6Induction Hardened (58HRC~)2 ~ 18811 ~ 476 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided825 ~ 1098h5Induction Hardened (58HRC~)2 ~ 243 ~ 6--

-

1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1025 ~ 1198h5Induction Hardened (58HRC~)2 ~ 323 ~ 8--

-

1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ~ 1398h5Induction Hardened (58HRC~)2 ~ 403 ~ 10--

-

1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ~ 1398h5Induction Hardened (58HRC~)2 ~ 524 ~ 11--

Loading...

Price list

Part NumberUnit Price
TypeDMin. L
~
50
L51
~
100
L101
~
150
L151
~
200
L201
~
250
L251
~
300
L301
~
350
L351
~
400
L401
~
450
L451
~
500
L501
~
550
L551
~
600
L601
~
650
L651
~
700
L701
~
750
L751
~
800
L801
~
850
L851
~
900
L901
~
950
L951
~
1000
L1001
~
1100
L1101
~
1200
L1201
~
1300
L1301
~
1400
L1401
~
1498
  SFAG
[ ! ]SFUG
[ ! ]SFAC
[ ! ]SFCU
8                    -----
10                    -----
12                      ---
13                      ---
15                      ---
16                      ---
18                      ---
20                      ---
25                      ---
30                         
35                         
40                         
50                         
  SSFAG
[ ! ]SSFUG
[ ! ]SSFAC
[ ! ]SSFCU
8                    -----
10                    -----
12                      ---
13                      ---
15                      ---
16                      ---
18                      ---
20                      ---
25                      ---
30                         
35                         
40                         
50                         
  PSFAG
[ ! ]PSFUG
[ ! ]PSFAC
[ ! ]PSFCU
8                    -----
10                    -----
12                      ---
13                      ---
15                      ---
16                      ---
18                      ---
20                      ---
25                      ---
30                         
35                         
40                         
50                         
  PSSFAG
[ ! ]PSSFUG
[ ! ]PSSFAC
[ ! ]PSSFCU
8                    -----
10                    -----
12                      ---
13                      ---
15                      ---
16                      ---
18                      ---
20                      ---
25                      ---
30                         
35                         
40                         
50                         
• One End Stepped and Tapped
[ ! ]For D tolerance h5, add the relevant surcharge to the prices above.
 
 • One End Stepped
[ ! ]For D tolerance h5, add the relevant surcharge to the prices above.
[ ! ]For D tolerance g6, subtract the relevant charge from the prices above.
Part NumberUnit Price
TypeDMin. L
~
50
L51
~
100
L101
~
150
L151
~
200
L201
~
300
L301
~
400
L401
~
500
  RSFAG
[ ! ]RSFAC
8       
10       
12       
13       
15       
16       
18       
20       
25       
30       
[ ! ]For One End Stepped Shafts, subtract the relevant charge from the prices above.
Part NumberUnit Price
TypeDMin. L
~
100
L101
~
200
L201
~
400
L401
~
600
L601
~
800
L801
~
1000
L1001
~
1200
L1201
~
1498
  PSFGG
[ ! ]PSCGC
8, 10     ---
12, 13      --
15, 16       -
18, 20       -
25       -
30        
35        
40        
50        
[ ! ]For One End Stepped Shafts, subtract the relevant charge from the prices above.
Part NumberUnit Price
TypeDMin. L
~
100
L101
~
200
L201
~
400
L401
~
600
L601
~
800
L801
~
1000
L1001
~
1200
L1201
~
1498
  PSSFGG
[ ! ]PSSCGC
8, 10     ---
12, 13      --
15, 16       -
18, 20       -
25       -
30        
35        
40        
50        
[ ! ]For One End Stepped Shafts, subtract the relevant charge from the prices above.
 

Basic Information

Basic Shape One End Stepped End Shape (Right) No Machining Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)