(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Timing Pulleys - L Type

Timing Pulleys - L Type

[Material]
· Pulley: Extra super duralumin aluminum alloy, S45C equivalent, SUS304
· Flange: Aluminum alloy, SPCC,
[Surface treatment]
· Clear anodize, black anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black iron oxide coating

(i)Caution

  • Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

■L type

● Pulley Shape

Tooth Profile
(ISO Standard Rack Dimensions)

Shape A

Shape B

Shape D

* H Dimension L050=5, L075=8, L100=11

[ ! ]1

[ ! ]1

[ ! ]2

[ ! ]2

[ ! ]2

Timing Pulleys - L: Related Image
Tooth groove dimensions slightly vary according to the number of teeth. (Pitch: 9.525mm)
[ ! ] For aluminum flanges, the flange thickness is 1.5.
[!] 1 t = 2.0 for 60 and 72 toothed pulleys (Machined Flange)
[ ! ] The tolerance of the tap position dimension from the boss end face and pulley end face is ±0.3.
[ ! ] Shaft Bore Specs. H (Round hole), V or F (Stepped Hole), Y (Both Sides Stepped Hole) and WB (Two-stepped Hole) do not have tapped holes.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

● Shaft Bore Specification
Select shaft bore spec mark and each dim. from the table below.

[ ! ] Surface treatment may not be applied to the shaft bores.

H round hole

P Round Hole + Tap

N New JIS Keyway + Tap
C Old JIS Keyway + Tap

Timing Pulleys - L: Related Image

[ ! ] For A-Shape pulley, the screw holes are set at around 120° to keep away from peaks.
 

[ ! ] Specify NK10 when selecting the shaft bore dia. 10
and the keyway width 4.0 mm.

V Stepped Hole
 

F Stepped Hole
(Counterbored Hole on the Hub Side)

Y Both Ends Stepped Hole
 

WB Two-stepped hole
 

Timing Pulleys - L: Related Image

[ ! ] Z - d ≥ 2
[ ! ]3.0 ≤ J ≤ W-3.0

[ ! ] Applicable to Shape B only
[ ! ] Z - d ≥ 2
[ ! ]3.0 ≤ J ≤ L-3.0

[ ! ] Applicable to Shape A only
[ ! ]Q (R)-Y ≥ 2
[ ! ]S+T ≤ W-3.0
[ ! ]S (T) ≥ 3.0

[ ! ] Applicable to Shape A only
[ ! ]Q-R ≥ 2
[ ! ]R-WB ≥ 2
[ ! ]S+T ≤ W-3.0
[ ! ]S (T) ≥ 3.0

■Tapped Hole Dimensions
(Shaft Bore Specs.: P, N, C)
dH7
Shaft Bore I.D.
M
(Coarse)
Accessory
Set Screws
6 to 12M4M4 × 3
13 to 17M5M5 × 4
18 to 30M6M6 × 5
31 to 45M8M8 × 6
46 to 70M10M10 × 8
■Belt Nominal Width / Dimensions
mmNominal
L050L075L100L150
A14212740
W19263245
L Number of Teeth 10 to 5931384457
L Number of Teeth 60, 7239465357
TypeBelt Width[M] Material[S] Surface Treatment[A] Accessory
Set Screws
12.7 mm
(1/2 in)
19.1 mm
(3/4 in)
25.4 mm
(1 in)
38.1 mm
(1.5 in)
PulleyFlange *
L050L075L100L150
ATPAExtra Super Duralumin
Aluminum alloy
Aluminum alloyClear AnodizeSUS304
ATPBBlack Anodize
ATPKHard Clear Anodize
ATPNElectroless nickel plating
ATPTS45C EquivalentSPCCSCM435
(Black Oxide)
ATPBlack Oxide Coating
ATPPElectroless nickel plating
ATPSSUS304SUS304SUS304
[ ! ]Flange is already swaged, and set screws are included for Shaft Bores P, N and C.
* Flange is not included for Shape D.

Specification Table

 Part numberPulley ShapeShaft Bore Specs.: I.D.ZJQRST
(Shaft Bore Specs.: H, P, N, C)ATP14L075AN10       R47    
(Shaft Bore Specs.: V, F)ATP36L100AV15Z29J18.0       
(Shaft Bore Specs.: Y, WB)ATP50L150AY25    Q47S12T12
Part numberPulley
Shape
Pulley ShapeP.D.O.DDFE
TypeNumber of TeethType
Nominal Width
AB
Shaft Bore Specs.
H
Round Hole
V·Y·WB
Stepped Hole
P
Round Hole
Tapped
N·C
Keyway
Tapped
H
Round Hole
V·F
Stepped Hole
P
Round Hole
Tapped
N·C
Keyway
Tapped
d·Z1 mm Increments / Selectable
Aluminum
ATPA
ATPB
ATPK
ATPN


Steel
ATPT
ATP
ATPP


Stainless Steel
ATPS
10L050A

B
6-206-148-146-186-148-1430.3229.56223624
118-238-188-188-188-1433.3532.594027
12L050
L075
8-268-238-188-1836.3835.62274530
1339.4138.65
14L050

L075

L100

L150
8-318-238-218-268-208-2042.4541.68304835
158-2345.4844.72
1610-3610-2810-2310-2810-2210-2248.5147.75325540
1710-2610-3010-2410-2351.5450.7834
1810-4110-3310-3410-3210-2654.5753.81366145
1912-4612-3412-3512-3412-2812-2557.6156.84386750
2012-3612-3012-2660.6459.8840
2112-5212-4012-3712-3863.6762.91427056
2212-5312-4412-3812-4112-3312-3066.7065.94458060
2369.7368.9750
2412-6312-4912-4412-4612-3872.7772.008767
2512-4575.8075.04
2678.8378.07
2781.8681.10
2812-7112-5712-5084.8984.139575
2987.9387.17
3012-7212-6212-5512-5212-4212-3490.9690.20569980
3193.9993.23
3214-7614-6514-5514-5214-4214-3497.0296.2610484
3314-8314-7014-5914-4914-41100.0599.296311190
34103.08102.32
35106.12105.3611595
3614-85109.15108.39123102
37112.18111.42
3815-8515-7015-5515-5915-4915-41115.21114.45127105
39118.24117.48
40121.28120.51131110
4116-6716-5716-49124.31123.55135115
4216-8516-7016-55127.34126.5871
43130.37129.61140120
44133.40132.64
45136.44135.68144125
46139.47138.71
47142.50141.74152130
48145.53144.77
49148.56147.80160140
50151.60150.83
Steel
ATPT
ATP
ATPP
51154.63153.87165
52157.66156.90
53160.69159.93170150
54163.72162.96
5516-90166.75165.99180155
56169.79169.03
5716-95172.82172.06160
5816-100175.85175.09190165
5916-105178.88178.12170
60A
D

(L150A only)
181.91181.15170 (160)
72218.30217.53225200 (197)
[NG]Shaft Bore Dia. 9, 51-54 are not available for Shaft Bore Spec. N. [!]Shaft Bore Dia.6.35 is selectable for Shaft Bore Specs. H, P, V, and F.
[!] NK10 is selectable for Shaft Bore Spec. N.
[NG]Shaft Bore Dia. 8, 11, 13, 14, 17, or 21-55 are not available for Shaft Bore Spec. C.

Alterations

Part numberPulley ShapeShaft Bore Specs.: I.D.ZJQRST(KC90, etc.)
ATP20L075AH25            KSC36K5
AlterationsSet Screw Angle ChangeNo FlangeSingle FlangeFlange Cut
CodeKC90NFCRFC·LFCFC
Spec.
Changes an angle of set screw to 90°.

[ ! ] For A-Shape pulley, the screw holes are set at around 90° to keep away from peaks.
 

Timing Pulleys - L: Related Image
(Flange 2 pcs. Included)
Ordering Code NFC

[NG] Not applicable to Shape D

Timing Pulleys - L: Related Image
(Flange 1 pc. Included)
Ordering Code RFC
Application Notes

[NG] Not applicable to Shape D

Timing Pulleys - L: Related Image
Cut the flange O.D. in 0.5 mm increments.
Ordering Code FC17
Application Notes
[ ! ]FC ≥ (O. D.) +1
[ ! ]FC ≤ F-2
[ ! ] No surface treatment is applied on flange circumference.
[NG] Not applicable to Shape D
Timing Pulleys - L: Related Image
AlterationsRetaining Ring GrooveTaper for Bearing HolderHub ShorteningTapped Hole DimensionsIncluded Set Screw
Length Change
CodeSRGBTCBCTPCSLH
Spec.Retaining Ring Groove applicable to the shaft dia. of stepped hole is machined.
Ordering Code 2.5 to 36.5 mm
0.5 mm Increments
Applicable Conditions
[ ! ] Minimum Thickness: 2 mm

[ ! ] Applicable to Shaft Bore Specs. V and F only

[ ! ] Standards of retaining ring groove for Z dim. is applied

[ ! ] n ≤ J−SRG−m
Ordering Code SRG7
Timing Pulleys - L: Related Image
Taper for retaining bearing inner ring
 
Ordering Code BTC8-TL1.5
Application Notes
[ ! ] Applicable to Shape A only
[ ! ] Applicable to Shaft Bore Specs. H and P only
[ ! ]TL < L-W

[ ! ] When E-D ≤ 6, one side installed and 1 pc. of flange included

Timing Pulleys - L: Related Image
Cuts the hub length in 0.5 mm increments.
Ordering Code BC6.5
Application Notes

[!] Shaft Bore Specs. H, V, F: 3 ≤ BC < L-W

[!] Shaft Bore Specs. P, N, C: M+3 ≤ BC < L-W

[NG] Not applicable to Shape A and D
Timing Pulleys - L: Related Image
Ordering Code TPC5
Application Notes

[ ! ] Applicable to Shaft Bore Specs. P, N, C only

MTPC
M4M5
M5M4·M6
M6M5·M8
M8M6·M10
M10M8
Ordering Code SLH10
Application Notes

[ ! ] Applicable to Shaft Bore Specs. P, N, C only

Set ScrewsSLH
M4 × 35·8
M5 × 46·10
M6 × 510
M8 × 610·12
M10 × 812·15
AlterationsAdd Side Holes [!] Conditions may vary depending on the shaft bore specs.
Side Tapped HoleSide Through HoleSide Counterbored
CodeQTC·QFC·QSCKTC·KFC·KSCZTC·ZFC·ZSC
Spec.Machines tapped hole on the side surface of hub side.
Ordering Code QTC28−M4
Q□C Selection Specify the hole position (P. C. D. dim.).
M Selection M3, M4, M5, M6, M8
Application Notes
[NG] Not applicable to Shape D
[ ! ] Minimum Thickness: 2 mm
[!] Conditions may vary depending on the shaft bore specs.

Timing Pulleys - L: Related Image

(6 Locations)

(4 Locations)

(3 Locations)

Machines through hole on the side surface.
Ordering Code KTC28−K4.5
K□C Selection Specify the hole position (P. C. D. dim.).
Specify K K4.0 to 13.0 (0.5 mm Increments)
Application Notes
[NG] Not applicable to Shape D
[ ! ] Minimum Thickness: 2 mm
[!] Conditions may vary depending on the shaft bore specs.

Timing Pulleys - L: Related Image

(6 Locations)

(4 Locations)

(3 Locations)

Machines counterbored hole on the side surface.
Ordering Code ZTC28−ZM4
Z□C Selection Specify the hole position (P. C. D. dim.).
ZM Selection ZM3, ZM4, ZM5, ZM6, ZM8
Application Notes
[NG] Not applicable to Shape D
[ ! ] Minimum Thickness: 2 mm
[!] Conditions may vary depending on the shaft bore specs.

Timing Pulleys - L: Related Image

(6 Locations)

(4 Locations)

(3 Locations)

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
ATP10L050-A-C[10,​12]
ATP10L050-A-H6.35
ATP10L050-A-H[6-20/1]
ATP10L050-A-N[8,​10,​11,​12,​13,​14]
ATP10L050-A-NK10
ATP10L050-A-P6.35
ATP10L050-A-P[6-14/1]
ATP10L050-A-V6.35
ATP10L050-A-V[6-18/1]
ATP10L050-A-WB[6-18/1]
ATP10L050-A-Y[6-18/1]
ATP10L050-B-C[10,​12]
ATP10L050-B-F6.35
ATP10L050-B-F[6-16/1]
ATP10L050-B-H6.35
ATP10L050-B-H[6-18/1]
ATP10L050-B-N[8,​10,​11,​12,​13,​14]
ATP10L050-B-NK10
ATP10L050-B-P6.35
ATP10L050-B-P[6-14/1]
ATP10L050-B-V6.35
ATP10L050-B-V[6-16/1]
ATP12L050-A-C[10,​12,​15,​16,​18]
ATP12L050-A-H[8-26/1]
ATP12L050-A-N8
ATP12L050-A-N[10-18/1]
ATP12L050-A-NK10
ATP12L050-A-P[8-18/1]
ATP12L050-A-V[8-24/1]
ATP12L050-A-WB[8-24/1]
ATP12L050-A-Y[8-24/1]
ATP12L050-B-C[10,​12,​15,​16,​18]
ATP12L050-B-F[8-21/1]
ATP12L050-B-H[8-23/1]
ATP12L050-B-N8
ATP12L050-B-N[10-18/1]
ATP12L050-B-NK10
ATP12L050-B-P[8-18/1]
ATP12L050-B-V[8-21/1]
ATP12L075-A-C[10,​12,​15,​16,​18]
ATP12L075-A-H[8-26/1]
ATP12L075-A-N8
ATP12L075-A-N[10-18/1]
ATP12L075-A-NK10
ATP12L075-A-P[8-18/1]
ATP12L075-A-V[8-24/1]
ATP12L075-A-WB[8-24/1]
ATP12L075-A-Y[8-24/1]
ATP12L075-B-C[10,​12,​15,​16,​18]
ATP12L075-B-F[8-21/1]
ATP12L075-B-H[8-23/1]
ATP12L075-B-N8
ATP12L075-B-N[10-18/1]
ATP12L075-B-NK10
ATP12L075-B-P[8-18/1]
ATP12L075-B-V[8-21/1]
ATP14L050-A-C[10,​12,​15,​16,​18,​19,​20]
ATP14L050-A-H[8-31/1]
ATP14L050-A-N8
ATP14L050-A-N[10-21/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBelt Width Used
(mm)
No. of Teeth
(T)
Pulley Shape Material Belt Width
(Inch)
Surface Treatment Shaft Bore Specifications (Both Ends Stepped Hole) [Y]
(mm)
Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N]
(mm)
Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C]
(mm)
Shaft Bore Specifications (Round Hole + Tap) [P]
(mm)
Shaft Bore Specifications (Round Hole) [H]
(mm)
Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
(Ø)
Shaft Bore Specifications (Stepped Hole) [V]
(mm)
Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F]
(mm)
Shaft Bore Specifications (Two-stepped Hole) [WB]
(mm)

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating--10 ~ 12------

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating----6.35----

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating----6 ~ 20----

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating-8 ~ 14-------

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating-----10---

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating---6.35-----

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating---6 ~ 14-----

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating------6.35--

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating------6 ~ 18--

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating--------6 ~ 18

-

1 Piece(s) 18 Day(s) 1012.710Shape A[Steel] S45C Equivalent0.5Black Oxide Coating6 ~ 18--------

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating--10 ~ 12------

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating-------6.35-

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating-------6 ~ 16-

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating----6.35----

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating----6 ~ 18----

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating-8 ~ 14-------

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating-----10---

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating---6.35-----

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating---6 ~ 14-----

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating------6.35--

-

1 Piece(s) 18 Day(s) 1012.710Shape B[Steel] S45C Equivalent0.5Black Oxide Coating------6 ~ 16--

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating--10 ~ 18------

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating----8 ~ 26----

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating-8-------

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating-10 ~ 18-------

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating-----10---

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating---8 ~ 18-----

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating------8 ~ 24--

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating--------8 ~ 24

-

1 Piece(s) 18 Day(s) 1012.712Shape A[Steel] S45C Equivalent0.5Black Oxide Coating8 ~ 24--------

-

1 Piece(s) 18 Day(s) 1012.712Shape B[Steel] S45C Equivalent0.5Black Oxide Coating--10 ~ 18------

-

1 Piece(s) 18 Day(s) 1012.712Shape B[Steel] S45C Equivalent0.5Black Oxide Coating-------8 ~ 21-

-

1 Piece(s) 18 Day(s) 1012.712Shape B[Steel] S45C Equivalent0.5Black Oxide Coating----8 ~ 23----

-

1 Piece(s) 18 Day(s) 1012.712Shape B[Steel] S45C Equivalent0.5Black Oxide Coating-8-------

-

1 Piece(s) 18 Day(s) 1012.712Shape B[Steel] S45C Equivalent0.5Black Oxide Coating-10 ~ 18-------

-

1 Piece(s) 18 Day(s) 1012.712Shape B[Steel] S45C Equivalent0.5Black Oxide Coating-----10---

-

1 Piece(s) 18 Day(s) 1012.712Shape B[Steel] S45C Equivalent0.5Black Oxide Coating---8 ~ 18-----

-

1 Piece(s) 18 Day(s) 1012.712Shape B[Steel] S45C Equivalent0.5Black Oxide Coating------8 ~ 21--

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating--10 ~ 18------

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating----8 ~ 26----

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating-8-------

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating-10 ~ 18-------

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating-----10---

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating---8 ~ 18-----

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating------8 ~ 24--

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating--------8 ~ 24

-

1 Piece(s) 18 Day(s) 1019.112Shape A[Steel] S45C Equivalent0.75Black Oxide Coating8 ~ 24--------

-

1 Piece(s) 18 Day(s) 1019.112Shape B[Steel] S45C Equivalent0.75Black Oxide Coating--10 ~ 18------

-

1 Piece(s) 18 Day(s) 1019.112Shape B[Steel] S45C Equivalent0.75Black Oxide Coating-------8 ~ 21-

-

1 Piece(s) 18 Day(s) 1019.112Shape B[Steel] S45C Equivalent0.75Black Oxide Coating----8 ~ 23----

-

1 Piece(s) 18 Day(s) 1019.112Shape B[Steel] S45C Equivalent0.75Black Oxide Coating-8-------

-

1 Piece(s) 18 Day(s) 1019.112Shape B[Steel] S45C Equivalent0.75Black Oxide Coating-10 ~ 18-------

-

1 Piece(s) 18 Day(s) 1019.112Shape B[Steel] S45C Equivalent0.75Black Oxide Coating-----10---

-

1 Piece(s) 18 Day(s) 1019.112Shape B[Steel] S45C Equivalent0.75Black Oxide Coating---8 ~ 18-----

-

1 Piece(s) 18 Day(s) 1019.112Shape B[Steel] S45C Equivalent0.75Black Oxide Coating------8 ~ 21--

-

1 Piece(s) 10 Day(s) or more 1012.714Shape A[Steel] S45C Equivalent0.5Black Oxide Coating--10 ~ 20------

-

1 Piece(s) 10 Day(s) or more 1012.714Shape A[Steel] S45C Equivalent0.5Black Oxide Coating----8 ~ 31----

-

1 Piece(s) 10 Day(s) or more 1012.714Shape A[Steel] S45C Equivalent0.5Black Oxide Coating-8-------

-

1 Piece(s) 10 Day(s) or more 1012.714Shape A[Steel] S45C Equivalent0.5Black Oxide Coating-10 ~ 21-------

Loading...

 

Basic Information

Type Timing Pulleys Belt Type L Timing Pulley / Idler Pulleys

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)