(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Flanged Linear Bushings - Single, Opposite Counterbored Hole

Volume Discount

Check FAQ of this product (5 items)

MISUMI

Flanged Linear Bushings - Single, Opposite Counterbored Hole
The linear bushing supports and guides a load, enabling smooth and accurate linear motion along a specified path. It provides a variety of sizes to choose from.
[Feature]
● Support Shaft Diameter Minimum/Maximum (mm.): 3 and 50
● Overall Length Minimum/Maximum (mm.): 10 and 100
● Flange Shape : Round Flange, Square Flange and Compact Flange
● Material:
- Outer Cylinder - SUJ2 Equivalent or SUS440C Equivalent
- Ball - SUJ2 Equivalent or SUS440C Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.

(i)Caution

Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

Part Number

Configured Part Number is shown.

Dimensional Drawing

Round Flange

Square flange

Compact Flange

dr = 3 to 13

dr = 16 to 50

Product Specifications

Counterbored Holes	Type			Outer Cylinder			Balls	Retainer	Operating Ambient Temperature	[A] Accessory
Counterbored Holes	Round Flange	Square flange	Compact Flange	[M] Material	[H] Hardness	[S] Surface Treatment	[M] Material	[M] Material	Operating Ambient Temperature	[A] Accessory
Opposite Counterbored	LHZR	LHZS	LHZC	SUJ2 Equivalent	58HRC or more	—	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	−20 to 80°C	Seal [M] Material Nitrile Rubber (－20 to 120°C)
Standard	LHFR	LHFS	LHFC
	LHFR−N No Seal	LHFS−N No Seal	LHFC−N No Seal
	LHFRF	LHFSF	LHFCF					Stainless Steel (SUS)	−20 to 110°C
	LHFRR	LHFSR	LHFCR			Low Temperature Black Chrome Plating	SUS440C Equivalent	Plastic (Duracon M90 Equivalent)	−20 to 80°C
	LHFRM	LHFSM	LHFCM			Electroless Nickel Plating
	LHFRM−N No Seal	LHFSM−N No Seal	LHFCM−N No Seal
	LHFRMF	LHFSMF	LHFCMF					Stainless Steel (SUS)	−20 to 110°C
	SLHFR	SLHFS	SLHFC	SUS440C Equivalent	56HRC or more	—		Plastic (Duracon M90 Equivalent)	−20 to 80°C
	SLHFRS	SLHFSS	SLHFCS	SUS440C Equivalent	56HRC or more	—		Stainless Steel (SUS)	−20 to 120°C

Specification Table

Part Number
LHFR8 LHFR−N10 LHFRR8 LHFRR10L	(No Seal) (Low Temperature Black Chrome Plating) (L Type Greased)	[ ! ] Alternative grease types available.

dr		D Tolerance			L		H	T	d	d₁	t	P.C.D.	W	F	A	Eccentricity (Max.) * 1	Balls Rows	Perpendicularity * 2	Basic Load Rating		Mass (g)
	Tolerance		Surface Treatment Not Provided	Surface Treatment Provided		Tolerance	H	T	d	d₁	t	P.C.D.	W	F	A	Eccentricity (Max.) * 1	Balls Rows	Perpendicularity * 2	C (Dynamic) N	Co (Static) N	Round Flange	Square flange	Compact Flange
3	0 −0.008	7	0 −0.011	0 −0.015	10	±0.3	19	3.5	2.5	4.5	2.1	13	15	—	13	0.008	4	0.008	69	105	7	5.1	6
4		8			12		20	3.5	2.5	4.5	2.1	14	16	—	14				88	127	8	6.2	7
5		10			15		25	5	3.5	6	3.1	17	20	—	17				167	206	17	13	14
6	0 −0.009	12	0 −0.013	0 −0.018	19		28					20	22	—	20	0.012		0.012	206	265	24	18	21
8		15	0 −0.013	0 −0.018	24		32					24	25	—	24				265	380	37	29	33
10		19	0 −0.016	0 −0.021	29		40	6	4.5	7.5	4.1	29	30	—	29				372	549	72	52	64
12		21			30		42					32	32	—	32				412	598	76	57	68
13		23			32		43					33	34	—	33				510	784	88	72	81
16		28			37		48					38	37	22	31				775	1180	120	104	112
20	0 −0.010	32	0 −0.019	0 −0.025	42		54	8	5.5	9	5.1	43	42	24	36	0.015	5	0.015	882	1370	180	145	167
25		40			59		62	8	5.5	9	5.1	51	50	32	40		6		980	1570	340	300	325
30		45			64		74	10	6.6	11	6.1	60	58	35	49				1570	2740	470	375	388
35	0 −0.012	52	0 −0.022	0 −0.030	70		82	10	6.6	11	6.1	67	64	38	55	0.020		0.020	1670	3140	650	560	575
40		60			80		96	13	9	14	8.1	78	75	45	64				2160	4020	1060	880	913
50		80			100		116	13	9	14	8.1	98	92	56	80				3820	7940	2200	2000	2037

* 1. The maximum amount of misalignment between the center point of the outer diameter D and the center point of the inner diameter dr.
* 2. Perpendicularity of D to flange mounting surface.
[ ! ] Anti-rust oil is applied at the time of delivery.
[ ! ] No seal supplied for dr = 3 or 4.
" ! " There are 2 engraving types for products without seals. Example: Part Number: For LHFR-N10, it will be either LHFR-N10 or LHFR10-N.

Grease coating
By selecting the grease below, change to the product with grease coating is available.

Type	Product Name	Main Features
A Type	Alvania Grease S2 (by Showa Shell Sekiyu)	General-purpose grease suitable for various grease lubrication locations.
Y Type	AFF (Made by THK Co., Ltd.)	Grease with less particles, stable rolling resistance, and excellent fretting resistance.
G Type	LG2 (Made by NSK Ltd.)	Grease with less particles, excellent wear and rust resistance.
L Type	ET-100K (Made by KYODO YUSHI Co., Ltd.)	Superior heat resistance and oxidation stability. Also high adhesion and cohesion with limited splash or leakage.
H Type	FGL (Lubriplate)	Suitable for lubrication of equipment used in food, beverage and pharmaceutical industries. (NSF H-1 Reg. No. 043534)

[ ! ] Grease coating cannot be selected for the Type without seal.

Grease Performance Table (Reference Value)

Item	Conditions	Unit	Measurement Method	A Type	Y Type	G Type	L Type	H Type
Thickener	—	—	—	Lithium Type	Lithium Type	Lithium Type	Aromatic Diurea	Aluminum Complex Soap
Base Oil	—	—	—	Mineral Oil	Fine Synthetic Oil	Mineral Oil + Synthetic Hydrocarbon Oil	Ether Synthetic Oil	USP White Oil
Base Oil Kinematic Viscosity	40°C	mm2/s	JIS K2220 23	131	100	32	—	105 (ASTMD-445)
Base Oil Kinematic Viscosity	100°C	mm2/s	JIS K2220 23	12.2	—	5.4	—	11.5 (ASTMD-445)
Worked Penetration	—	—	JIS K2220 7	283	315	199	280	310 (ASTMD-217)
Dropping Point	—	°C	JIS K2220 8	181	220	201	260 <	238 (ASTMD-217)
Evaporation Amount	99°C × 22 hr	wt%	JIS K2220 10	0.2	0.7	1.4	—	0.27 (ASTMD−972)
Oil Separation	100°C × 24 hr	wt%	JIS K2220 11	2.4	2.6	0.8	1.2	2.1 (ASTMD−1742)
Operating Temp.	In Air	°C	—	-25 to 120	-40 to 120	−20 to 70	−40 to 200	−12 to 177

Selection Supporting Information

Fitting of Shaft O.D. and Bushing I.D.

Fitting of Bushing O.D. and Housing I.D.

Reference: Tolerance range of MISUMI linear bushings I.D. and shaft O.D.

Reference: Tolerance range of linear bushings O.D. and housing diameter made by MISUMI


Dimensions (mm)	Linear Bushings Single Type (LMU) I.D. Tolerance				Shaft (SFJ) O.D. Tolerance (g6)
0	⌀3 to 5	⌀6 to 16	⌀20 to 30	⌀35 to 50
－0.001
－0.002					⌀3
－0.003
－0.004						⌀4 to 6
－0.005							⌀8 to 10
－0.006								⌀12 to 18
－0.007									⌀20 to 30
－0.008
－0.009										⌀35 to 50
－0.010
－0.011
－0.012
－0.013
－0.014
－0.015
－0.016
－0.017
－0.018
－0.019
－0.020
－0.021
－0.022
－0.023
－0.024
－0.025


	Product		Customer's design
I.D. dr	Outer Dia. D		Housing Dia.
I.D. dr		Tolerance		Tolerance H7
3	7	0 －0.009	7	+0.015 0
4	8		8
5	10		10
6	12	0 －0.011	12	+0.018 0
8	15	0 －0.011	15	+0.018 0
10	19	0 －0.013	19	+0.021 0
12	21		21
13	23		23
16	28		28
20	32	0 －0.016	32	+0.025 0
25	40		40
30	45		45
35	52	0 －0.019	52	+0.030 0
40	60		60
50	80		80

For MISUMI linear bushings, use in combination with MISUMI shafts (hardened with g6 tolerance) is recommended.

For MISUMI Linear Bushings, mounting Housing of H7 tolerance is recommended.
Bushing and Housing will be clearance fit.

Technical Information

■Calculation of Life

When the linear systems are in motion with loads, rolling surfaces and races are subject to repeated stress and will show stress-induced scaly damages called "flaking". The total run distance of a linear system until this flaking first appears is the life of a linear system.

Rated life can be calculated using the formula below from the basic dynamic load rating and the actual load applied to the linear bushings.

L = ( f_H· f_T· f_Cf_w· CP )³· 50

L: Rated Life (km)
C: Basic Dynamic Load Rating (N)
P: Applied Load (N)
f_w: Load Factor (Refer to Table-4)
f_H : Hardness Factor (Refer to Fig.-1)
f_T : Temperature Factor (Refer to Fig.-2)
f_C : Contact Factor (Refer to Table-3)

Hardness Factor (f_H)

Temperature Factor (f_T)

When using linear systems, ample hardness of the shafts in contact with balls is needed as well.
If the ample hardness of the shafts are not obtained, the allowable loads are reduced and the life will be shortened.

When linear systems are exposed to temperature higher than 100°C, hardness will be reduced, and allowable loads and life will be reduced.

Fig. 1. Hardness Factor

Fig. 2. Temperature Factor

Contact Factor (f_c)

Load Factor (f_w)

Generally, more than 2 linear systems are used for 1 shaft. In this case, the load applied to each linear system will vary depending on machining accuracies and will not be equally distributed. As the result, allowable load per linear system will vary depending on the number of linear systems used on one shaft.

To calculate the load applied to the linear systems, in addition to object weight, it requires inertia force attributed to motion velocity or moment loads. Furthermore, it is necessary to accurately determine the temporal change of each. However, in reciprocating motion applications, it is difficult to obtain accurate calculations due to the effects of vibrations and shocks, in addition to those of repeated starting and stopping motions. Therefore, use the Table below in order to simplify the Life Calculations.

Table-3. Contact Factor

Table-4. Load Factor

Number of bushings on one shaft	Contact Factor f_c
1	1.00
2	0.81
3	0.72
4	0.66
5	0.61

Conditions of Use	f_w
No external shocks or vibrations when running in low speed: 15 m/min. or less	1.0 to 1.5
No excessive external shocks or vibrations when running in medium speed: 60 m/min. or less	1.5 to 2.0
External shocks and vibrations given when running in high speed: 60 m/min. or more	2.0 to 3.5

Life in hours can be obtained by calculating travel distance per hour.
If the stroke length and number of strokes are constant, life in hours can be calculated using the following formula.

L_h = L· 10³2· ℓs· n₁· 60

L_h: Life Hours (hr), Ls: Stroke Length (m), L: Rated Life (km)
n₁: Reciprocating Cycles per Minute (cpm)

Cautions/Prohibitions

(1) When mounting Linear Bushings and Housings, use Retaining Rings (Snap Rings), Stoppers, etc.

■Mounting with Retaining Ring

■Mounting with Stoppers

(2) Linear Bushings are not suitable for rotating motion or usage with repetitive insertion and extraction of shafts. Forced use may cause damage.

Flanged Linear Bushing - Single, Opposite Counterbored Hole. (2) Linear Bushings are not suitable for rotating motion or usage with repetitive insertion and extraction of shafts. Forced use may cause damage.

(3) If large moment load (offset load) is to be applied, Short/Single Type Linear Bushings are not suitable. Use of Double Type or Multiple Linear Bushings is recommended.

Flanged Linear Bushing - Single, Opposite Counterbored Hole. (3) If large moment load (offset load) is to be applied, Short/Single Type Linear Bushings are not suitable. Use of Double Type or Multiple Linear Bushings is recommended.

(4) When assembling with linear shafts, forcing the shaft into the bushing with angular misalignment may cause the ball retainers to deform and balls to fall out. Be sure to align the centers and insert the shaft gently.

Flanged Linear Bushing - Single, Opposite Counterbored Hole. (4) When assembling with linear shafts, forcing the shaft into the bushing with angular misalignment may cause the ball retainers to deform and balls to fall out. Be sure to align the centers and insert the shaft gently.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
LHFC3
LHFC3G
LHFC3H
LHFC3L
LHFC4
LHFC4G
LHFC4H
LHFC4L
LHFC5
LHFC5G
LHFC5H
LHFC5L
LHFC6
LHFC6G
LHFC6H
LHFC6L
LHFC8
LHFC8G
LHFC8H
LHFC8L
LHFC10
LHFC10G
LHFC10H
LHFC10L
LHFC12
LHFC12G
LHFC12H
LHFC12L
LHFC13
LHFC13G
LHFC13H
LHFC13L
LHFC16
LHFC16G
LHFC16H
LHFC16L
LHFC20
LHFC20G
LHFC20H
LHFC20L
LHFC25
LHFC25G
LHFC25H
LHFC25L
LHFC30
LHFC30G
LHFC30H
LHFC30L
LHFC35G
LHFC35H
LHFC35L
LHFC40
LHFC40G
LHFC40H
LHFC40L
LHFC50
LHFC50G
LHFC50H
LHFC50L
LHFC-N6

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Environmentally friendly	Type	Characteristics/Applications	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Flange Type	Outer Sleeve Material	Outer Sleeve Surface Treatment	Outer Dia. D (Ø)	Lubrication Type	Accuracy	Motion	Types	Length	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)	Inscribed Circle Dia. Tolerance (Negative Side) (mm)	Flange Shape	Linear Motion / Rotational Motion	Basic Rated Load, Dynamic Rating (N)	Ball Material	Retainer Material	Seal	Counterbored Hole	Greased Filled
137,691 IDR	1 Piece(s)	Available	8 Day(s) or more	10	-	Flange	-	3	10	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	7	Not Provided	High Grade	Linear	Standard Flange	Single	8	69	105	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	Not Provided
367,177 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	3	10	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	7	Not Provided	High Grade	Linear	Standard Flange	Single	8	69	105	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	G Type (Low Dust Generation)
367,177 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	3	10	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	7	Not Provided	High Grade	Linear	Standard Flange	Single	8	69	105	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	H Type (For Food, Drinking Water)
367,177 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	3	10	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	7	Not Provided	High Grade	Linear	Standard Flange	Single	8	69	105	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	L Type (Heat Resistant)
130,041 IDR	1 Piece(s)	Available	8 Day(s) or more	10	-	Flange	-	4	12	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	8	Not Provided	High Grade	Linear	Standard Flange	Single	8	88	127	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	Not Provided
359,527 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	4	12	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	8	Not Provided	High Grade	Linear	Standard Flange	Single	8	88	127	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	G Type (Low Dust Generation)
359,527 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	4	12	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	8	Not Provided	High Grade	Linear	Standard Flange	Single	8	88	127	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	H Type (For Food, Drinking Water)
359,527 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	4	12	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	8	Not Provided	High Grade	Linear	Standard Flange	Single	8	88	127	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	L Type (Heat Resistant)
130,041 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	5	15	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	10	Not Provided	High Grade	Linear	Standard Flange	Single	8	167	206	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
359,527 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	5	15	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	10	Not Provided	High Grade	Linear	Standard Flange	Single	8	167	206	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
359,527 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	5	15	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	10	Not Provided	High Grade	Linear	Standard Flange	Single	8	167	206	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
359,527 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	5	15	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	10	Not Provided	High Grade	Linear	Standard Flange	Single	8	167	206	-0.008	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
110,918 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	6	19	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	12	Not Provided	High Grade	Linear	Standard Flange	Single	12	206	265	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
340,404 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	6	19	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	12	Not Provided	High Grade	Linear	Standard Flange	Single	12	206	265	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
340,404 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	6	19	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	12	Not Provided	High Grade	Linear	Standard Flange	Single	12	206	265	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
340,404 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	6	19	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	12	Not Provided	High Grade	Linear	Standard Flange	Single	12	206	265	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
87,626 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	8	24	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	15	Not Provided	High Grade	Linear	Standard Flange	Single	12	265	380	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
340,404 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	8	24	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	15	Not Provided	High Grade	Linear	Standard Flange	Single	12	265	380	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
340,404 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	8	24	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	15	Not Provided	High Grade	Linear	Standard Flange	Single	12	265	380	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
340,404 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	8	24	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	15	Not Provided	High Grade	Linear	Standard Flange	Single	12	265	380	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
114,744 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	10	29	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	19	Not Provided	High Grade	Linear	Standard Flange	Single	12	372	549	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
344,229 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	10	29	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	19	Not Provided	High Grade	Linear	Standard Flange	Single	12	372	549	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
344,229 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	10	29	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	19	Not Provided	High Grade	Linear	Standard Flange	Single	12	372	549	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
344,229 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	10	29	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	19	Not Provided	High Grade	Linear	Standard Flange	Single	12	372	549	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
122,392 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	12	30	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	21	Not Provided	High Grade	Linear	Standard Flange	Single	12	412	598	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
466,621 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	12	30	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	21	Not Provided	High Grade	Linear	Standard Flange	Single	12	412	598	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
466,621 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	12	30	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	21	Not Provided	High Grade	Linear	Standard Flange	Single	12	412	598	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
466,621 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	12	30	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	21	Not Provided	High Grade	Linear	Standard Flange	Single	12	412	598	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
131,955 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	13	32	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	23	Not Provided	High Grade	Linear	Standard Flange	Single	12	510	784	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
476,182 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	13	32	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	23	Not Provided	High Grade	Linear	Standard Flange	Single	12	510	784	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
476,182 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	13	32	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	23	Not Provided	High Grade	Linear	Standard Flange	Single	12	510	784	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
476,182 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	13	32	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	23	Not Provided	High Grade	Linear	Standard Flange	Single	12	510	784	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
151,078 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	16	37	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	28	Not Provided	High Grade	Linear	Standard Flange	Single	12	775	1180	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
495,307 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	16	37	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	28	Not Provided	High Grade	Linear	Standard Flange	Single	12	775	1180	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
495,307 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	16	37	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	28	Not Provided	High Grade	Linear	Standard Flange	Single	12	775	1180	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
495,307 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	16	37	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	28	Not Provided	High Grade	Linear	Standard Flange	Single	12	775	1180	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
179,764 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	20	42	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	32	Not Provided	High Grade	Linear	Standard Flange	Single	15	882	1370	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
523,992 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	20	42	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	32	Not Provided	High Grade	Linear	Standard Flange	Single	15	882	1370	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
523,992 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	20	42	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	32	Not Provided	High Grade	Linear	Standard Flange	Single	15	882	1370	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
523,992 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	20	42	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	32	Not Provided	High Grade	Linear	Standard Flange	Single	15	882	1370	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
252,435 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	25	59	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	40	Not Provided	High Grade	Linear	Standard Flange	Single	15	980	1570	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
596,663 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	25	59	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	40	Not Provided	High Grade	Linear	Standard Flange	Single	15	980	1570	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
596,663 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	25	59	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	40	Not Provided	High Grade	Linear	Standard Flange	Single	15	980	1570	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
596,663 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	25	59	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	40	Not Provided	High Grade	Linear	Standard Flange	Single	15	980	1570	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
348,054 IDR	1 Piece(s)		20 Day(s)	10	-	Flange	-	30	64	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	45	Not Provided	High Grade	Linear	Standard Flange	Single	15	1570	2740	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
692,282 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	30	64	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	45	Not Provided	High Grade	Linear	Standard Flange	Single	15	1570	2740	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
692,282 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	30	64	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	45	Not Provided	High Grade	Linear	Standard Flange	Single	15	1570	2740	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
692,282 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	30	64	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	45	Not Provided	High Grade	Linear	Standard Flange	Single	15	1570	2740	-0.01	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
990,613 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	35	70	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	52	Not Provided	High Grade	Linear	Standard Flange	Single	20	1670	3140	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
990,613 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	35	70	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	52	Not Provided	High Grade	Linear	Standard Flange	Single	20	1670	3140	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
990,613 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	35	70	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	52	Not Provided	High Grade	Linear	Standard Flange	Single	20	1670	3140	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
736,267 IDR	1 Piece(s)	Available	Same day	10	-	Flange	-	40	80	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	60	Not Provided	High Grade	Linear	Standard Flange	Single	20	2160	4020	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
1,156,991 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	40	80	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	60	Not Provided	High Grade	Linear	Standard Flange	Single	20	2160	4020	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
1,156,991 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	40	80	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	60	Not Provided	High Grade	Linear	Standard Flange	Single	20	2160	4020	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
1,156,991 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	40	80	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	60	Not Provided	High Grade	Linear	Standard Flange	Single	20	2160	4020	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
1,028,158 IDR	1 Piece(s)		Same day	10	-	Flange	-	50	100	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	80	Not Provided	High Grade	Linear	Standard Flange	Single	20	3820	7940	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	Not Provided
1,405,600 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	50	100	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	80	Not Provided	High Grade	Linear	Standard Flange	Single	20	3820	7940	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	G Type (Low Dust Generation)
1,405,600 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	50	100	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	80	Not Provided	High Grade	Linear	Standard Flange	Single	20	3820	7940	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	H Type (For Food, Drinking Water)
1,405,600 IDR	1 Piece(s)	Available	12 Day(s) or more	10	-	Flange	-	50	100	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	80	Not Provided	High Grade	Linear	Standard Flange	Single	20	3820	7940	-0.012	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	With Seal	Standard	L Type (Heat Resistant)
109,006 IDR	1 Piece(s)	Available	8 Day(s) or more	10	-	Flange	-	6	19	Standard Flange	[Steel] SUJ2 Equivalent	No Surface Treatment	12	Not Provided	High Grade	Linear	Standard Flange	Single	12	206	265	-0.009	-	-	-	SUJ2 Equivalent	Plastic (Duracon M90 Equivalent)	No Seal	Standard	Not Provided

1
2
3
4
5
Next >>

Product TOP

Basic Information

Style	Standard	Ball Recirculating Type	Single

Configure

746 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Environmentally friendly
- RoHS Compliant (10 Substances)
Clear
Type
- Flange
- Standard Flange
Clear
Characteristics/Applications
Not Applicable
Clear
Inscribed Circle Dia. dr(Ø)
3

4

5

6

8

10

12

13

16

20

25

30

35

40

50
Clear
Overall Length L(mm)
10

12

15

19

24

29

30

32

37

42

59

64

70

80

100
Clear
Flange Type
- Standard Flange
Clear
Outer Sleeve Material
- Steel
  - SUJ2 Equivalent
- SUS440C Equivalent
Clear
Outer Dia. D(Ø)
7

8

10

12

15

19

21

23

28

32

40

45

52

60

80
Clear
Lubrication Type
- Not Provided
- Grease Coating
  - Type A
Clear
Accuracy
- High Grade
Clear
Motion
- Linear
Clear
Types
- Standard Flange
Clear
Length
- Single
Clear
Eccentricity(µm)
8

12

15

20
Clear
Flange Shape
- Square Flange
Clear
Linear Motion / Rotational Motion
- Linear Bushing (Linear Motion Only)
Clear
Basic Rated Load, Dynamic Rating(N)
412
Clear
Ball Material
- SUJ2 Equivalent
- SUS440C Equivalent
Clear
Retainer Material
- Plastic (Duracon M90 Equivalent)
- Stainless Steel
Clear
Seal
- No Seal
- With Seal
Clear
Counterbored Hole
- Opposite Counterbored
- Standard
Clear
Greased Filled
- G Type (Low Dust Generation)
- H Type (For Food, Drinking Water)
- L Type (Heat Resistant)
- Not Provided
Clear
type
- LHFC
- LHFC-N
- LHFCF
- LHFCM
- LHFCMF
- LHFCR
- LHFR
- LHFR-N
- LHFRF
- LHFRM
- LHFRMF
- LHFRR
- LHFS
- LHFS-N
- LHFSF
- LHFSM
- LHFSMF
- LHFSR
- LHZC
- LHZR
- LHZS
- SLHFC
- SLHFCS
- SLHFR
- SLHFRS
- SLHFS
- SLHFSS
Clear
Outer Sleeve Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Electroless Nickel Plating
  - Low Temperature Black Chrome Plating
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

8 Day(s) or Less

12 Day(s) or Less

13 Day(s) or Less

20 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Are there recommended shaft specifications?: Answer: Yes, there are. For a normal clearance fit, we recommend using a hardened shaft with f6 to g6 tolerances. For a tight clearance fit, we recommend using a hardened shaft with h6 tolerances.
Question: Which wears out faster, the shaft or the linear bushing?: Answer: Generally, the linear bushing wears out faster. This is because the linear bushing is always in contact with the balls, unlike the shaft.
Question: Can it be used for rotational motion?: Answer: No, it cannot be used for rotational motion. Linear bushings are designed for linear motion and using them for rotational motion may cause damage.
Question: Can the shaft be repeatedly inserted and removed?: Answer: It is not suitable for applications requiring repeated insertion and removal. Doing so may cause the balls to fall out or deform the retainer, so please align the core and assemble it quietly.
Question: How do I calculate the lifespan?: Answer: Please refer to the "Rated Life" in the following link:
Maintenance Free

Check other FAQ (2 items) Hide

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Flanged Linear Bushings - Single, Opposite Counterbored Hole

(i)Caution

Dimensional Drawing

Product Specifications

Specification Table

Selection Supporting Information

Fitting of Shaft O.D. and Bushing I.D.

Fitting of Bushing O.D. and Housing I.D.

Technical Information

■Calculation of Life

Cautions/Prohibitions

Part Number

Basic Information

Configure

Specification/Dimensions

Environmentally friendly

Type

Characteristics/Applications

Inscribed Circle Dia. dr(Ø)

Overall Length L(mm)

Flange Type

Outer Sleeve Material

Outer Dia. D(Ø)

Lubrication Type

Accuracy

Motion

Types

Length

Eccentricity(µm)

Flange Shape

Linear Motion / Rotational Motion

Basic Rated Load, Dynamic Rating(N)

Ball Material

Retainer Material

Seal

Counterbored Hole

Greased Filled

type

Outer Sleeve Surface Treatment

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB