(NW/KF Standard) Clamps, Center Rings and Others（Applicable Flange Size (Nominal)：40）

• 

  Vacuum Pipe Fittings/Clamp

  MISUMI

  [Features]·A fitting for vacuum piping.

  CAD ：

  2D / 3D

  Standard Price:	189,326 IDR
  Days to Ship:	8 Day(s) or more

• 

  NW clamp (ISO-KF flange type)

  MIRAPRO

  NW (KF)-compliant vacuum clamps.

  CAD ：

  2D / 3D

  Standard Price:	184,406 IDR
  Days to Ship:	8 Day(s) or more

• 

  Center Rings

  MISUMI

  [Features]·An inexpensive type without an outer ring. [Material]·SUS304.

  CAD ：

  2D / 3D

  Standard Price:	286,857 IDR
  Days to Ship:	8 Day(s) or more

• 

  NW Center Ring

  MIRAPRO

  NW center ring for vacuum piping
  
  [Features]
  · Includes Viton O ring.
  · Can be used in temperature environments of up to 150℃.

  CAD ：

  2D / 3D

  Standard Price:	167,463 IDR-
  Days to Ship:	8 Day(s) or more

• 

  NW/KF Standard O-Ring

  COSMOTEC

  Variety of Cosmotec fittings available from Misumi VONA.

  Standard Price:	159,728 IDR-
  Days to Ship:	11 Day(s) or more

• 

  VP Series Centering Ring

  IRIE KOKEN

  Many reliable Irie Koken products available from Misumi VONA.
  
  [Features]
  - IKC is an ISO-based pipe fitting for NW-KF flanges. The VP series (10 sizes) for vacuum piping and hp series (8 sizes) for high-pressure piping are provided.
  - No need for bolts nor nuts. Just insert the inside taper of the coupling into the taper on the flange and turn the wing screw to insert or remove.
  - Can be heated up to 150℃.
  - Leakage volume is 1×10^-9 Pa•m_³/s or less.

  CAD ：

  2D / 3D

  Standard Price:	178,333 IDR
  Days to Ship:	8 Day(s) or more

• 

  Clamp series NW clamp

  ADVANTEC(VACUUM PIPING)

  A NW clamp from Advantech (vacuum piping), ranked among the best in the country in the field of vacuum piping, which has high requirements for seals. Various types are available to cover many different sizes from NW10 to large diameters.

  Standard Price:	254,333 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Clean & Pack]Fittings for Vacuum Plumbing - Center Ring

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-Rust Packing	Oil Removal	General Environment	Regular Assembly Process
  					Post Battery Assembly Process
  SH-□□	Precision Cleaning	Degassing Double Packing	Oil Removal Dust Removal	Clean Environment (Class 10 to 1,000)	Battery Assembly Process
  					LCD-Related Post Assembly Process
  					In-Vehicle Camera Assembly Process
  SHD-□□	Electrolytic Polishing + Precision Cleaning	Degassing Double Packing	Oil Removal Dust Removal Outgas Reduction	Vacuum Environment Clean Environment (Class 10 to 1,000)	Pre-Semiconductor Process
  					Liquid Crystal Deposition Process
  					Pre-OLED Process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  [Features]·Economical type with no outer ring. [Material]·SUS304.

  CAD ：

  2D / 3D

  Standard Price:	306,109 IDR-
  Days to Ship:	11 Day(s) or more

• 

  NW Semicircular Clamp

  MIRAPRO

  An NW half moon clamp for vacuum piping.

  CAD ：

  2D / 3D

  Standard Price:	359,346 IDR
  Days to Ship:	8 Day(s) or more

• 

  NW Outer Ring

  MIRAPRO

  NW outer rings for vacuum pipes

  CAD ：

  2D / 3D

  Standard Price:	302,046 IDR
  Days to Ship:	8 Day(s) or more

• 

  Clamp Series, NW Bulkhead Clamp

  ADVANTEC(VACUUM PIPING)

  High quality. Quick delivery. Low cost.

  Standard Price:	744,045 IDR
  Days to Ship:	8 Day(s) or more

• 

  VP Series Single-Action Coupling

  IRIE KOKEN

  Many reliable Irie Koken products available from Misumi VONA.
  
  [Features]
  · With the IKC, the VP series (10 sizes) (for vacuum piping) and the HP series (8 sizes) (for high pressure piping) are available as standard as pipe fittings (ISO standard, NW-FK).
  · No need for bolts or nuts. This can be easily attached and removed by simply inserting the internally tapered part of the coupling into the tapered part of the flange and turning the thumbscrew.
  · A heating temperature of up to 150°C can be used.
  He leak quantity is 1×10⁻⁹ Pa • m³/s or lower.

  CAD ：

  2D / 3D

  Standard Price:	146,667 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Clean & Pack]Fittings for Vacuum Plumbing - Center Ring, Outer Ring

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-Rust Packing	Oil Removal	General Environment	Regular Assembly Process
  					Post Battery Assembly Process
  SH-□□	Precision Cleaning	Degassing Double Packing	Oil Removal Dust Removal	Clean Environment (Class 10 to 1,000)	Battery Assembly Process
  					LCD-Related Post Assembly Process
  					In-Vehicle Camera Assembly Process
  SHD-□□	Electrolytic Polishing + Precision Cleaning	Degassing Double Packing	Oil Removal Dust Removal Outgas Reduction	Vacuum Environment Clean Environment (Class 10 to 1,000)	Pre-Semiconductor Process
  					Liquid Crystal Deposition Process
  					Pre-OLED Process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  [Features]·Easy to fit type with outer ring.

  CAD ：

  2D / 3D

  Standard Price:	472,026 IDR-
  Days to Ship:	11 Day(s) or more

• 

  PJ Clamp (KF Flange Type)

  MIRAPRO

  The connection pipe uses JIS standard sizes (outer diameter 20mm, thickness 2mm pipe on KF16 only). The sealing surface of the flange is protected by a cap and tape.

  Standard Price:	947,653 IDR
  Days to Ship:	11 Day(s) or more

• 

  NW Center Ring (With Net)

  MIRAPRO

  NW Center Ring (with net) for vacuum piping
  
  [Features]
  ・Wire mesh for duct: SUS304.
  · Includes Viton O ring.
  · Can be used in temperature environments of up to 150℃.
  · Standard mesh size: #8.

  CAD ：

  2D / 3D

  Standard Price:	961,068 IDR
  Days to Ship:	8 Day(s) or more

• 

  NW Centering Ring

  ADVANTEC(VACUUM PIPING)

  [Features]
  · Conforms to ISO standards.
  · Products with special dimensions available for manufacture

  Standard Price:	156,674 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ring Series, Center Ring (Center Ring with Outer Ring), NW-OZ

  ADVANTEC(VACUUM PIPING)

  High-quality, fast delivery, and low-cost.

  Standard Price:	413,940 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Ring Series, Center Ring With Mesh

  ADVANTEC(VACUUM PIPING)

  High quality. Quick delivery. Low cost.
  
  [Features]
  · Products of Special Dimensions Can Be Manufactured

  Standard Price:	995,629 IDR
  Days to Ship:	8 Day(s) or more

• 

  O-Ring for Vacuum

  ADVANTEC(VACUUM PIPING)

  [Features]
  · Products of special dimensions can be manufactured.

  Standard Price:	56,622 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Clamp Series NW Chain Clamp (10 to 63)

  ADVANTEC(VACUUM PIPING)

  High-quality, fast delivery, and low-cost.

  Standard Price:	524,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Elastomer Seal Outer Center Ring NW 16-63

  EVAC

  Misumi offers a range of reassuring and reliable Evac brands.
  
  [Features]
  · The elastomer seal is a standard sealing part for NW/KF piping.
  · Outer center rings with high corrosion resistance and high-pressure support as well as inner center rings which are suitable for use in high temperature and high vacuum environments.
  · Guide rings in fluoropolymer, aluminum, or stainless steel (SUS316L).
  · Standardization of fluoropolymer guide ring and FEP O-ring type for high corrosion resistant applications.
  · The FEP O-ring withstands environments with temperatures between -50°C and 200°C.
  · Evac Viton® O-rings can withstand temperatures of up to 200℃ continuously.
  · Can be used for vacuum of 10-7 Pa.
  · Can be used in pressures of up to 2 MPa.
  · The inner ring and outer ring also prevent excessive torque on the clamp.

  Standard Price:	372,155 IDR
  Days to Ship:	12 Day(s) or more

• 

  NW/KF Standard Chain Clamp

  COSMOTEC

  [Features]
  ・ By distributing the force with multiple links and tightening it uniformly, more reliable sealing is possible compared to the conventional split C-clamp
  ・ Ergonomically conscious knob design that does not burden your hands when tightening
  ・ It has easy attachment/detachment and does not cause galling with the flange
  ・ Since the O-ring is crushed evenly, the lifespan of the O-link can be extended
  ・ Since it also has durability against vibration, the clamp will not loosen even if there is vibration
  [Applications]
  ・ Vacuum vessel piping system

  Standard Price:	1,357,500 IDR
  Days to Ship:	8 Day(s) or more

• 

  NW/KF Standard Center Ring with An Outer Ring

  COSMOTEC

  Variety of Cosmotec fittings available from Misumi VONA.
  
  [Features]
  · Connected to a flange with one touch by using inner stainless guide.
  · The outer ring can be used at high pressures of up to 0.2 MPa.
  · Provided with mesh to prevent contamination. NW/KF 16/10 conversion center ring comes standard and eliminates the need for conversion.

  Standard Price:	588,728 IDR
  Days to Ship:	12 Day(s) or more

• 

  NW / KF Standard Centering Ring With Mesh

  COSMOTEC

  Single-action connection to the flange using the stainless steel guide inside.
  [Features]
  ・ The one with outer ring can be used at high pressure up to 0.2 MPa
  ・ Center ring with mesh to prevent foreign object from entering
  [Applications]
  ・ It is used for vacuum vessel piping system

  Standard Price:	1,104,726 IDR
  Days to Ship:	8 Day(s) or more

• 

  Center Ring with A VP Series wire Cross

  IRIE KOKEN

  Many reliable Irie Koken products available from Misumi VONA.
  
  [Features]
  · No need for bolts nor nuts. This can be easily attached and removed by just inserting the inside taper part of the coupling into the taper part of the flange and turning the wing screw.
  · Heating temperature of up to 150℃ can be used.
  · The He leak volume is 1×10⁹－9 Pa-㎥/s.

  CAD ：

  2D / 3D

  Standard Price:	903,333 IDR
  Days to Ship:	12 Day(s) or more

• 

  HP Series, Clamp Chain

  IRIE KOKEN

  Many reliable Irie Koken products available from Misumi VONA.

  CAD ：

  2D / 3D

  Standard Price:	346,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  HP Series, Center Rings

  IRIE KOKEN

  Many dependable and reliable Irie Koken products available from Misumi VONA.

  CAD ：

  2D / 3D

  Standard Price:	383,500 IDR
  Days to Ship:	78 Day(s) or more

Loading...