FUJII DENKO Safety Belts（Product Type：Temporary Equipment）

• 

  Horizontal Main Rope Tensioner 97 Harip

  FUJII DENKO

  [Features]
  · Horizontal main rope can easily be installed and removed by hand.
  [Applications]
  · Equipment for installing temporary horizontal main ropes for construction site plant work etc.
  · The tension of the main rope is around 10 to 20 kg as it is pulled by hand.

  Standard Price:	1,243,606 IDR
  Days to Ship:	8 Day(s) or more

• 

  Safety Belt Mounting Device Screw Clamp

  FUJII DENKO

  [Features]
  · Lightweight and compact, so it can be easily operated with one hand.
  · Mounting is possible even with the safety belt hook attached.
  [Applications]
  · Jig for attaching a safety belt to an insert bolt in the ceiling.

  Standard Price:	887,740 IDR
  Days to Ship:	12 Day(s) or more

• 

  Parent Rope for Raising and Lowering

  FUJII DENKO

  [Features]
  ·Tetoron rope is a vertical main rope and is a low-cost type.
  ·The hook at the tip has a mouth opening of 50 mm and can be hooked directly to a single pipe.
  [Applications]
  ·Main line for vertical movement using 78 Rorip and SS Rorip.
  ·Horizontal master rope using 97HR-3.

  Standard Price:	1,415,752 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rorip for Inclined Surfaces KS21-1W

  FUJII DENKO

  The fall arrester is operated easily using a lever. It can be inserted midway into a main rope. It employs an extra thick hook thimble (for rope wear prevention).

  Standard Price:	1,459,846 IDR
  Days to Ship:	8 Day(s) or more

• 

  Yoke Tool for Tilted Surface Belt

  FUJII DENKO

  A metal fitting that prevents the belt constricting the waist when working on inclined surfaces. Used by attaching to the back side belt.

  Standard Price:	930,506 IDR
  Days to Ship:	16 Day(s) or more

• 

  78 Low Lip for Raising and Lowering Fixed Position Work

  FUJII DENKO

  [Features]
  ・ Prevents falling of steel towers, utility poles, ladders, etc., while moving up and down, and prevents falling during fixed position work by switching levers
  ・ The vertical master rope can be easily attached and detached even in the middle of the master rope

  Standard Price:	1,443,593 IDR
  Days to Ship:	12 Day(s) or more

• 

  Roof Work Fall Prevention Device Roof Rope 300 Type

  FUJII DENKO

  [Features]
  ・ Use a telescopic adjuster to connect the main rope attached to the hook metal fittings with a carabiner to the fall prevention equipment and move it on the roof
  ・ Since the length of the main rope is adjusted to any length with the expansion and contraction adjuster, there is little feeling of restraint and work with a margin can be done
  ・ It is a temporary fall prevention device for roofing work such as low-rise houses
  ・ Can be installed regardless of roof tiles
  [Applications]
  ・ For safety work of roof work of solar power generation system installation work and antenna work

  Standard Price:	12,533,663 IDR
  Days to Ship:	8 Day(s) or more

• 

  Tree Climbing Tools

  FUJII DENKO

  The short inner claws and long outer claws grip the tree when ascending and descending. One strap and elastic band is worn on each foot.

  Standard Price:	4,477,856 IDR
  Days to Ship:	8 Day(s) or more

• 

  Rorip for Inclined Surfaces KS-1

  FUJII DENKO

  The claw that grips the main rope is the only W claw in Japan. The fall arrester is grasped in the palm of the hand, so it is easy to operate. The hook thimble (for rope wear prevention) is prone to breakage because a load is applied to it. This has been overcome by employing an extra thick thimble.

  Standard Price:	2,450,156 IDR
  Days to Ship:	8 Day(s) or more

• 

  For Sloped Surface, Special Lanyard with 1 Hook Per Suspension Line

  FUJII DENKO

  The fall arrester is operated easily using a lever. It can be inserted midway into a main rope. It employs an extra thick hook thimble (for rope wear prevention).

  Standard Price:	1,176,878 IDR
  Days to Ship:	8 Day(s) or more

• 

  Inclined Slop Assist Harness 1 Lanyard Hook Model for 2 Suspension Line

  FUJII DENKO

  The claw that grips the main rope is the only W claw in Japan. The fall arrester is grasped in the palm of the hand, so it is easy to operate. It can be inserted midway into a main rope. It employs an extra thick hook thimble (for rope wear prevention).

  Standard Price:	2,112,306 IDR
  Days to Ship:	8 Day(s) or more

• 

  SD Rorip for Inclined Surfaces SD-3

  FUJII DENKO

  [Features]
  ・ You can work while descending with both hands available by fixing the drop speed adjustment bracket arbitrarily and tilting the main body lever
  ·Safety belt standard 3 types Safety belt: For inclined surface harnesses and vertical surface harnesses. For vertical surface work, slope work, civil engineering work, and slope work
  ・ A grip device that supports the nozzle with one hand and adjusts the descent speed with the other hand when descending an inclined surface when spraying concrete, etc.

  Standard Price:	7,840,419 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Assist Harness for Sloped Surface

  FUJII DENKO

  A fall arrester for inclined surfaces which prevents falls caused by gripping the operation lever by mistake when not connected to the main rope. Ministry of Land, Infrastructure, Transport and Tourism "New Technology Information System NETIS" registered product. An optional product for the fall arrester for inclined surfaces.

  Standard Price:	2,978,591 IDR
  Days to Ship:	8 Day(s) or more

Loading...