Jigs for Manual Tightening（Page3）

• 

  Toggle Hook Clamp 6848V

  NABEYA

  6848VNI is made of stainless steel. The hook length can be adjusted.

  Standard Price:	1,119,389 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Hold Clamp, Clamp

  NABEYA

  Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

  Standard Price:	4,139,523 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Low Edge Clamp (Double Sided Type)

  NABEYA

  It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.

  Standard Price:	373,483 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Four-Groove

  NABEYA

  Maximum tightening force: 40 kN (tightening torque: 190 N·m)

  Standard Price:	34,685,757 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Heavy Duty Toggle Side Clamp 6842PL

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Standard Price:	2,755,531 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Heavy Duty Toggle Side Clamp 6845

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Standard Price:	1,992,497 IDR
  Days to Ship:	14 Day(s) or more

• 

  Heavy Duty Toggle Hook Clamp 6849PH

  NABEYA

  Heavy-duty type hook clamp. The hook length can be adjusted.

  Standard Price:	4,727,835 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Quick Down Clamp

  NABEYA

  Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).

  Standard Price:	2,353,810 IDR-
  Days to Ship:	8 Day(s) or more

• 

  PA Feed Plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	231,541 IDR
  Days to Ship:	17 Day(s) or more

• 

  Adjustment Bolt for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	551,413 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Oil Cup for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	86,538 IDR
  Days to Ship:	17 Day(s) or more

• 

  Knob for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	273,947 IDR
  Days to Ship:	17 Day(s) or more

• 

  Wedge Clamp Stopper Part (For T-shaped grooves)

  NABEYA

  It is for the T-groove of the stopper part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, Workpiece contact surface can be selected from 3 types: flat, step, universal type. The manufacturer also sell the stopper part only.

  Standard Price:	1,797,354 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Wedge Clamp Stopper Part (For tapped holes)

  NABEYA

  Wedge clamp, stopper tapped hole, flat type.

  Standard Price:	1,224,253 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Wedge Clamp Set (For tapped holes)

  NABEYA

  The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

  Standard Price:	2,912,553 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Applicable Clamp Units 7110M

  NABEYA

  This is the clamp unit part of the Clamp Unit 7110 series. M 12 mm, M 16 mm / Select from 2 types. Since it is a unit, nuts, bolts, support screws (height adjustment), etc., are included, so there is no need to assemble.

  Standard Price:	7,052,451 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Swing Clamp B Type

  NABEYA

  It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.

  Standard Price:	5,221,476 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Swing Clamp A Type

  NABEYA

  [Features]
  · It can be horizontally swung to attach and remove workpieces.
  · Can be used for T-grooves and for tapped holes.
  · The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.
  · Tool-less (with handle).
  · Free clamping direction (without guide groove).
  · The built-in spring causes it to automatically rise when unclamping.
  · Attachments can be mounted

  Standard Price:	5,546,206 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Swing Clamp Joint S Type

  NABEYA

  This is a block for adjusting the height of the S-type swing clamp set. If the height of the S-type swing clamp set is not sufficient, select the S-type swing clamp joint. M 8 mm, M 16 mm / 2 types available

  Standard Price:	228,599 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Toggle Down Clamp 6802

  NABEYA

  Single-action clamp for vertical clamp. There is no troublesome screw feeding. The 6802S type also has a careless mistake reduction function that makes it impossible to operate without holding the safety lever.

  Standard Price:	789,173 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Toggle Hook Clamp 6847

  NABEYA

  Suitable for tightening drum and can lids. The hook length can be adjusted.

  Standard Price:	1,334,655 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Toggle Hook Clamp 6847S

  NABEYA

  The structure prevents return unless the button is pressed, preventing erroneous operation and malfunction. Suitable for tightening drum and can lids. The hook length can be adjusted.

  Standard Price:	3,070,348 IDR
  Days to Ship:	16 Day(s) or more

• 

  Universal Clamp Main Body

  NABEYA

  [Features]
  · Parts for universal clamps.
  · It can steplessly fasten tall and short workpieces.

  Standard Price:	817,410 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Screw for TCL/TCH

  NABEYA

  It is a part for toe adjustment clamp. The screw is common to all sizes. The manufacturer sell from parts

  Standard Price:	345,052 IDR
  Days to Ship:	8 Day(s) or more

• 

  PA Adjustment Bolt for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	231,541 IDR-
  Days to Ship:	17 Day(s) or more

• 

  PA Spring for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	324,561 IDR
  Days to Ship:	17 Day(s) or more

• 

  Side Jack A Type

  NABEYA

  Simply insert into the T-groove. Useful for receiving cutting resistance from the side.

  Standard Price:	700,039 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Swing Clamp Set S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  Standard Price:	856,711 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Start Element ZA

  NABEYA

  It will be the spacer part of the Clamp Unit 7111 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.

  Standard Price:	4,575,832 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Start Element 7110FB

  NABEYA

  It will be the spacer part of the Clamp Unit 7112 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.

  Standard Price:	3,501,027 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Start Element 7110Z

  NABEYA

  S45C / hardened spacer element standard type.

  Standard Price:	3,126,753 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Draw Clamp

  NABEYA

  The workpiece is fixed in place by pulling it in from below. Minimal interference with the blade, ideal for 5-axis and composite machine clamps.

  Standard Price:	913,118 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Toe Adjusting Clamp TCL Type

  NABEYA

  Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

  Standard Price:	4,568,974 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Toggle Down Clamp 6832

  NABEYA

  [Features]
  · SS400/galvanized toggle down clamp 6832.
  · 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Standard Price:	606,075 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Toggle Hook Clamp 6848H

  NABEYA

  6848HNI is made of stainless steel. The hook length can be adjusted.

  Standard Price:	1,120,356 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Helical clamp

  NABEYA

  Achieve large fastening strength in restricted spaces. Can be used with two clamping methods.

  Standard Price:	1,423,054 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Universal Clamp Semi-Cylindrical Sealing Washer

  NABEYA

  [Features]
  · Parts for universal clamps.
  · The swivel pad fits on the workpiece and clamping surface for vertical tightening.
  · Although this product is equipped with T-nuts, it can also be used with them removed

  Standard Price:	191,722 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Low Edge Clamp (One Sided Type)

  NABEYA

  [Features]
  · It is a compact clamp that does not lift much.
  · Ideal for machining thin, low-profile objects.
  · There are three sizes of tightening bolts: M4, M6, and M12.
  · It has a compact size and large stroke of 0.3 to 1.1.
  · The guide groove of the main body shortens workpiece setup time (excluding LWC4).
  · It has a structure that prevents chips from entering inside.
  · Ideal for small workpieces.
  · Brass material is used to avoid scratching workpieces.
  · Lifting up of the workpiece is minimal.
  · Ideal for thin workpieces.

  Standard Price:	233,333 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Atlas Screw Jack

  NABEYA

  Convenient for fixing workpieces thanks to its widened base and lengthened screw.

  Standard Price:	2,747,548 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Attachment for Clamp Support Jack

  NABEYA

  [Features]
  · The one that fits the workpiece can be selected from the various types of attachments.
  · For N0.E-175 clamp support screw jack and N0.E-176 screw jack only.

  Standard Price:	262,139 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Height Setting Jack

  NABEYA

  With a hole at the upper center. (φ12) E-756 Attachment for jack can be used in combination. Bearing is embedded in thread component.

  Standard Price:	3,916,469 IDR
  Days to Ship:	16 Day(s) or more

• 

  Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
  
  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Clamp bar springs up to easily attach/detach the workpiece.
  · Free from troubles such as oil leakage as it does not use oil.

  Standard Price:	9,625,877 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Clamp Bar for Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.

  Standard Price:	940,561 IDR
  Days to Ship:	16 Day(s) or more

• 

  Ballpoint Jack

  NABEYA

  The point contact enables quick centering and support with black scale surfaces.

  Standard Price:	1,482,501 IDR
  Days to Ship:	16 Day(s) or more

• 

  Screw Jack Locknut

  NABEYA

  S45C/quenched HRC35±4 screw jack locknut.

  Standard Price:	357,324 IDR
  Days to Ship:	16 Day(s) or more

Loading...