(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

GT Diamond Cutter (NDC-105W)

GT Diamond Cutter NDC-105W

Click this image to zoom it.

Move the mouse over the image to zoom

  • NDC-105S
  • NDC-105W

[Features]
Lineup: A segmented type designed with an emphasis on speed (NDC-105S), A wave type designed with an emphasis on the cut section (NDC-105W); Outer diameter: 105 mm; Hole diameter: 20 mm (with 15-mm washer); Maximum rotational speed: 14,500 min-1
[Applications]
· Concrete, bricks, block, mortar, etc.

(i)Caution

  • Match the arrow with the rotational direction of the power tool. Check that there are no bends, cracks or chips on the product. Check that there is no rattling or wobbling after attaching the product. Check that there are no abnormal sounds or vibrations by turning the disk without any load after attaching. If you notice any abnormal sounds or vibrations during work, stop work immediately. Cannot be used for metals, woodwork or for polishing flat surfaces. Use at or below the maximum rotational speed of 14,500 min-1. If there is clogging or the sharpness has deteriorated, sharpen the product using soft materials such as a GC-type grind stone or brick.

Part Number

Configured Part Number is shown.

NDC-105W

Part Number
NDC-105W
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipWheel Type Blade thickness
(mm)

209,708 IDR

1 Piece(s) 9 Day(s) or more Wave Type2

Loading...

  1. 1

Basic Information

Product Type Diamond cutter Specifications Dry Type Application For concrete, mortar / Tile
Outer Diameter(mm) 105 Hole Diameter(mm) 20 (with 15-mm washer)

Please check the type/dimensions/specifications of the part NDC-105W in the GT Diamond Cutter series.

Products like this...

Part Number
NDC-105S
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipWheel Type Blade thickness
(mm)

132,066 IDR

1 Piece(s) 11 Day(s) or more Segment Type1.8

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)