(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Wedge Pulley
High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
· Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
· 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
· Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
[Applications]
· Fans, etc.
(i)Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Japanese Only
Part Number
Configured Part Number is shown.
Wedge Pulley Specification
Wedge pulley external appearance
Consistent production from casting to machining and surface treatment. Additionally, NC machinery, automatic machinery, balancers, etc. have been developed specifically for pulley machining. Cell production allows the production of many kinds of products in low volume, with short lead times. Delivering convenience to customers.
Convenient additional machining service has been standardized
Shaft hole, keyway, and set screw machining are available in standardized form.
Extensive product range. 491 size
3V: 153 size, 5V: 257 size, 8V: 81 size. 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used frequently in drive side mechanisms.
Moreover, the 3V ø56/60 (nominal size 56/60 mm), and 5V ø112/118/125/132/140 (nominal size 112/118/125/132/140) work with low edge cog type narrow width V belts
. Compared to regular lapped type belts, low edge cog type belts feature excellent flexibility and a high coefficient of friction. This improves transmission efficiency, and allows a smaller nominal size pulley to be used.
High quality exceeding JIS standards
The highest quality pulley, with materials, machining and balance accuracy exceeding JIS standards (JIS B1855-1991). Guaranteed imbalance tolerance on the outer circumference of 0.1% the pulley mass.
Product standard
Product standard conforms to JIS B1855-1991 "narrow width v pulleys"
Groove dimensions
The g dimension is set to 0.5 mm as shown in the Section A detail view. Years of research and testing have shown that this decreases wear and breakage, increasing belt service life. For this reason, the outer diameter of the wedge pulley is 1 mm larger
.
| Groove Shape | Nominal Size dn | α ± 0.5 (°) | w1 ± 0.1 | wg ± 0.13 | h | +0.5 | Standard Dimension k | e*1 | f min. | g |
|---|---|---|---|---|---|---|---|---|---|---|
| 0 | ||||||||||
| 3V | 90 Or Less | 36 | 8.9 | 9.23 | 9 | 0.6 | 10.3 ± 0.25 | 8.7 | +0.5 | |
| Over 90, And 150 Or Less | 38 | 9.24 | ||||||||
| Over 150, And 300 Or Less | 40 | 9.26 | ||||||||
| Over 300 | 42 | 9.28 | ||||||||
| 5V | 250 Or Less | 38 | 15.2 | 15.54 | 15 | 1.3 | 17.5 ± 0.25 | 12.7 | 0.5 | |
| Over 250, And 400 Or Less | 40 | 15.56 | ||||||||
| Over 400 | 42 | 15.58 | ||||||||
| 8V | 400 Or Less | 38 | 25.74 | 25 | 2.5 | 28.6 ±0.4 | 19 | 0.5 | ||
| Over 400, And 560 Or Less | 40 | 25.4 | 25.76 | |||||||
| Over 560 | 42 | 25.78 | ||||||||
Groove dimensions (units: mm)
*1: e cumulative error of 0.8 mm or less.
| Nominal Size dn | Outer Circumference Vibration Tolerance | Rim Side Vibration Tolerance | Diameter Tolerance |
|---|---|---|---|
| 125 Or Less | 0.15 (0.2) | 0.15(0.2) | ±0.4 (±0.6) |
| Over 125, And 315 Or Less | 0.2 (0.3) | 0.2(0.3) | ±0.6 (±0.8) |
| Over 315, And 710 Or Less | 0.3 (0.4) | 0.3(0.4) | ±0.9 (±1.2) |
| Over 715, And 1,000 Or Less | ±0.4 (±0.6) | 0.4(0.6) | ±1.2 (±1.6) |
| Over 1,000, And 1,250 Or Less | 0.5 (0.8) | 0.5 (0.8) | ±1.5 (±0.2) |
Outer circumference / rim side vibration tolerance value and outer diameter tolerance value (units: mm)
*Parentheses enclose the corresponding JIS B1855-1991 value
Balance
Imbalance mass allowance on the outer circumference is 0.1% or 1 g of the pulley mass, whichever is larger. At a circumferential speed of 15 m/s, this corresponds to G16 of the JIS B 0905 "Rotating Machines - Balance Quality of Rigid Rotors."
Material/finish
Wedge pulley: FC200 or higher coating, NBK blue (main body)
| Part Number |
|---|
| 200-3V-2 |
| 200-3V-2-[16-48/1]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 200-3V-2-[16-48/1]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Groove shape | Number of grooves (piece) | Type | Shape (mm) | Additional Work |
|---|---|---|---|---|---|---|---|---|---|---|
1,743,333 IDR | 1 Piece(s) | 13 Day(s) or more | 10 | 3V | 2 | 10U | 201 | No | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 3V | 2 | 10U | 201 | Available | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 3V | 2 | 10U | 201 | Available |
Loading...
Specification/Dimensions
-
Additional Work
- Available
- No
-
type
- 3V-1
- 3V-2
- 3V-3
- 3V-4
- 3V-5
- 3V-6
- 5V-10
- 5V-2
- 5V-3
- 5V-4
- 5V-5
- 5V-6
- 5V-8
- 8V-4
- 8V-6
- 8V-8
-
Groove shape
-
Number of grooves(piece)
- 1
- 2
- 3
- 4
- 5
- 6
- 8
- 10
-
Type
-
Shape(mm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 15 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy