(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

[Clean & Pack] Spring Pin (SH-SSPSR4-22)

[Clean & Pack] Spring Pin SH-SSPSR4-22

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing)    : Part Number SL-□□
·Precision cleaning (Degassing double packing)    : Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□
Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Process
SL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
SH-□□Precision cleaningDegassing double packingOil removal
Dust removal
Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removal
Dust removal
Outgas reduction
Vacuum environment
Clean environment (Class 10 to 1,000)
Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Caution

  • Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SH-SSPSR4-22

TypeBody MaterialCleaning Method
MaterialCleaning MethodCleaning EnvironmentPackaging TypePacking Environment
SL-SSPSRSpring Stainless Steel AlloyDegreasingGeneral environmentAnti-rust packingGeneral environment
SH-SSPSRPrecision cleaningClass 1,000Degassing double packingClass 10
SHD-SSPSRElectrolytic polishing + precision cleaning
Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.

Specification Table

Part Number
SL-SSPSR3-6
SH-SSPSR5-10
SHD-SSPSR10-20
LL Tolerance
5 to 10+ 0.5
0
12 to 50+ 1.0
0
56 to 100+ 1.5
0
Part Number* kNt (Reference)D
TypeD − Lminmax
SL-SSPSR
SH-SSPSR
SHD-SSPSR
2(Price Table below)2.760.42.152.25
36.20.63.153.25
410.80.84.24.4
517.2515.25.4
624.831.26.26.4
Maximum value of D is the maximum value on the pin's circumference and the minimum value for D is the average of D1, D2 and D3.
Reference: t conforms to JSMA No. 6 (Japan Spring Manufactures Association Standard).
* kN = Minimum Double Shearing Load
The mounting hole diameter for spring pins should be the same as the nominal diameter of the spring pin, with a mounting hole dimension tolerance of H12 as specified in JIS B0401-1.
Check the technical data here.
Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment

Alkaline warm pure water 
Ultrasonic pure water
cleaning after cleaning
with pure water
 
*3 times
 Dry Anti-rust single packing
·Precision cleaning (Part Number: SH-□□)
    

Working Environment: Class 1,000

 

Working Environment: Class 10

Hydrocarbon cleaning
Ro water cleaning
 Wash with pure
water (10 MΩ·cm) after
high-pressure water
jet cleaning (Ro water)
 Use pure water
(13 MΩ·cm)
 Use nitrogen blow 
Conducted on a clean
bench in a Class 10
clean environment
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
      

Working Environment: Class 1,000

 

Working Environment: Class 10

Hydrocarbon cleaning
Ro water cleaning
 Electrolytic polishing
with an electrolytic
polishing layer according
to the material
 Wash with pure
water (10 MΩ·cm) after
high-pressure water
jet cleaning (Ro water)
 Use warm pure water
(13 MΩ·cm)
 Use nitrogen blow 
Conducted on a clean
bench in a Class 10
clean environment
Packaging Example
For degreasing:
(Part Number: SL-□□)
For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ]Both the first and second layer packaging are degassed.
Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method

Product Part Number

Packaging Type

Effects Compared to Uncleaned Product

Environment (Standard)

Use Case and Process

DegreasingSL-□□Anti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
Precision cleaningSH-□□Degassing double packingOil removal
Dust removal
Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
Electrolytic polishing + precision cleaningSHD-□□Degassing double packingOil removal
Dust removal
Outgas reduction
Vacuum environment
Clean environment (Class 10 to 1,000)
Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
Part Number
SH-SSPSR4-22
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipNominal Dia. Length O.D. (Max.)
(mm)
O.D. (Min.)
(mm)

105,466 IDR

1 Piece(s)Available 12 Day(s) or more 4224.44.2

Loading...

  1. 1

Basic Information

Shaft Dia. Tolerance Positive Tolerance End Shape Standard Properties General
Surface Treatment Not attached Unit of Purchase Sold Separately (Can be purchased from 1 pc.) Material Certificate Available
Material Certificate: Material Spring Stainless Steel Alloy

Tech Support